answersLogoWhite

0

It sounds like for most of their cribs you remove the side that moves. You probably want to consult the original directions on how you put that side in it to figure out how to get it back out - as they say, you have to loose the front two gold bolts, too.

You don't have to put anything in instead, we just took our crib rail off and left the side fully open, but they sell a side rail to make it look a little nicer and to help encourage your kid not to roll out of the bed. :)

Here's what the FAQ on the pali website says: http://www.pali-design.com/index.php?path=customer_services&template=faq&section=customer_services&subsection=faq&page=faq

FAQ

How to convert a crib into a toddler bed To convert a crib into a toddler bed you must loosen the two front gold bolts left and right side of the crib and remove the dropside (the front gate that goes up and down). After removing the dropside be very careful that you tighten back your two gold bolts.

How to install the streight rail (toddler rail) To install a streight (toddler) rail loosen the two front gold bolts left and right side of the crib and remove the dropside, once you have removed the dropside replace with the streight rail. Always be very careful and make sure you tighten back your two gold bolts in the front.

User Avatar

Wiki User

16y ago

What else can I help you with?