answersLogoWhite

0

For a standard cot size doona (100 x 110cm) you will need 2.2 metres :)

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Can you use a duvet and a quilt?

Duvet is another word for comforter. A duvet cover is like a big, big pillowcase into which you insert your comforter (or duvet). Like a pillowcase, the duvet cover keeps the duvet clean longer.


How do you use a duvet cover?

A duvet cover is used as an envelope to hold a duvet. To insert the duvet into the duvet cover, first spread the duvet cover flat over the bed. Open the bottom of the duvet cover. Find the top of the duvet and grab hold of the two top corners. The tricky part is sliding the duvet into the duvet cover. As best you can, while continuing to hold tight to the duvet corners, work the duvet up to the top of the duvet cover. Place one corner of the duvet into the corresponding corner of the duvet cover. Hold tightly onto that corner from the outside. Next, do the same at the other top corner. Hold tight to both corners and pull them up to the top of the bed. Make sure the middle top side of the duvet also lines up with the middle top side of the duvet cover. Now, as best you can, slide the duvet cover down over top of the duvet. Both the duvet cover and duvet will likely be bunched up, but keep gently working it down. It is a bit tricky. The goal is to get the bottom two corners of the duvet aligned into the bottom corners of the duvet cover. When the duvet and cover are mostly aligned, give the covered duvet a good shake to even out the contents. When you are happy with the duvet distribution, do up the bottom of the duvet cover. Now, snuggle up.


Does Soft Wind make a rose duvet cover set?

There is a Soft Wind rose duvet cover set available at Macys.


How to Put on a Duvet Cover?

How to Put on A Duvet CoverPutting a duvet cover on a duvet properly seems like it might be a time-consuming and sometimes difficult task, primarily due to trying to balance the cover and duvet. Fortunately, when putting it on the proper way the task is simple and takes only a minute before the duvet looks beautiful and is properly protected by the cover.The first part of putting on the cover is laying out the duvet and then turning the duvet cover inside out. This makes it easier to get the cover onto the duvet. Once the cover is inside out, it is time to find and grab the inside corners of the cover. Always put the hands inside to make the process easier.Once the duvet cover is prepared and on the hands, pick up the top corners of the duvet. Since the duvet was already laid out flat, the top corners should be easy to locate.The last part of getting the cover onto the duvet is flipping the cover back onto the duvet so that the duvet falls into the middle. Shake the cover and duvet and it will fall until reaching the bottom. Close the cover according to the type of closure. Some might require buttoning, others will zip and some will have ties to close the cover.Once the cover is properly fastened, it is ready to place on the bed. The cover will not come off the duvet until it is time to clean and separate the two parts.


How much fabric is needed to make a full size bed duvet?

Hi, I just came back from the fabric district yesterday. I got some material to make a duvet for my daughter's king size bed. You need 11 yards according to an employee at Michael Levine's in Los Angeles.


How to Easily Put On Duvet and Comforter Covers and Keep Them in Place?

One of the most frustrating problems, when using duvets and comforter covers, is getting them on and keeping the duvet in place. The following steps will provide an easy way to put on your duvet and comforter covers and keep everything from shifting.Prepare the duvet or comforter and the cover. The first step you should do is get everything arranged for the process. You will need to spread the duvet or comforter out across the bed. Then you will need to turn your cover inside out and have the closed end of the cover at the bottom of the duvet.Attach the cover to the duvet or comforter. Using three or four safety pins (depending on the size of the duvet) pin the closed end of the cover to the bottom of the duvet. Using safety pins that blend well with the duvet or comforter cover will be a neat touch so not to distract from your design. Make sure you have one safety pin at each end then one or two towards the middle.Pull the cover over the duvet. Now you will need to reach through the cover and grab the bottom of the duvet to start pulling the cover up over the duvet. This may require a small amount of maneuvering but is much easier than trying to squeeze the duvet inside the cover.Fasten the duvet and add optional safety pins. Once you have the cover pulled all the way over the duvet you will need to attach the open end using the provided buttons. You can also add additional safety pins at the open end to attach the top portion of the duvet to the cover. This will also help prevent the duvet from moving around inside the cover.These steps will help reduce your frustration level when trying to put on your duvet and comforter covers. The added safety pins will also prevent the duvet from sliding around once inside the cover so that your bed is easier to make and looks nicer.


How do you buy a duvet cover for a queen size mattress that is extra deep?

A duvet cover is not to cover the mattress, but a Queen size comforter. It is to make the comforter look different or to cover an all white feather comforter. Mattress pads cover mattresses, and the ones that will fit and extra deep mattress will say extra deep on them


Do they make a bedding set to match the HSM 'Stage Curtains'?

Yes, they make a duvet cover and pillowcase that match the HSM Stage Curtains.


What fabric should you use to make a nappy stacker?

Any sturdy, non-stretch fabric will do. A cotton broadcloth or even quilted cotton fabric will serve nicely. You probably could do the job by using a crib sheet.


How to Make Your Own Duvet or Comforter Cover?

Do you want to change the look of your bedroom, but do not want to shell out a large expense? Consider making your own duvet or comforter cover. By changing up your duvet or comforter cover, you can change the whole look of your bedroom. Making your own duet or comforter cover is a relatively simple task that does not require you to be an accomplished seamstress. All you will need to be able to do is sew a few squares together and follow these simple directions. Step 1: Do not scrimp on fabric. Find yourself a good-quality fabric in a soft cotton or cotton blend. Flannel makes an excellent choice for the bottom of the duvet, as it is available in a multitude of colors and prints. Step 2: Measure your duvet or comforter and add 3 ¾ inches to the length and 1 ½ inches to the width to allow for the seams and hems. Step 3: When choosing colors and fabrics, it would be a good idea to have contrasting patterns and colors, so that it can be reversible. Be brave and live it up a little. Step 4: Once you have selected your fabric, place the right side of the fabrics back to back. Sew the pieces of fabric together with a ¼ inch seam along the sides and leave approximately a half inch along the top for a seam or closure. Step 5: If you want a non-traditional look, use buttons, hooks or ribbons for the top closure of the cover instead of zippers or snaps. Duvet and comforter covers are very versatile. Covers can be changed easily when a style or color is outgrown. Covers are much easier to clean than the duvet or comforter itself, as it is more easily handled and fits better into your home washing machine. By making your own duvet or comforter cover, you can create your own artistic look in your bedroom. A good way to keep costs down is to look for sheet sets on clearance. This will be an extremely easy way to sew a duvet or comforter cover, because there will be no need to cut the fabric to the right size.


What type of material should I use to make a crib skirt?

They say that the crib skirts require two types of fabric. One is a muslin that goes in under the crib mattress. The other calls for mid weight fabric. I would for cheaper money change the muslin to a cotton and then change the mid weight to a cotton as well. That will not only save you money but the cotton can be gotten soil resisted.


What are the disadvantages of using a double duvet cover on a single bed sized duvet?

The disadvantages of using a double duvet cover on a single sized duvet is that it is far to big for a single duvet. It will be very difficult to sleep in as the duvet may move around which, will make it hard to sleep well. This makes it very uncomfortable and the person might end up being potentially cold as the duvet might not be on them. In the end it will just end up being a stressful nights sleep as you toss and turn to get into a comfortable and warm position. You could wrap it round yourself but, then you might become a cocoon and have restricted movement. A bit like being in a sleeping bag hard to turn left or right.