answersLogoWhite

0

A lot.

This is an excerpt from Superior Threads website:

They say that it is difficult to be exact because everyone's technique is different. So they give us averages. This is more or less. These numbers are for the top thread only. Double them if you use the same thread for the bobbin.

Light Quilting

Medium Quilting

Heavy Quilting

Lap/Crib Size

200 yds

400 yds

600 yds

Twin Size

400 yds

800 yds

1,200 yds

Queen Size

600 yds

1,00 yds

1,600 yds

King Size

700 yds

1,500 yds

2,000 yds

I thought that I had seen a more precise calculator online but I lost the link.

Happy thoughts,

Moe

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How much material needed to make a queen size binding on a quilt?

To make a queen-size binding for a quilt, you'll typically need about 5 to 6 strips of fabric, each measuring 2.5 inches wide and the length of the quilt's perimeter. For a standard queen-size quilt, which is approximately 90 inches by 105 inches, you should have around 300 inches of total binding. This generally requires about 1.5 to 2 yards of fabric, depending on the width of the fabric you are using. Always double-check the perimeter of your specific quilt to ensure you have enough material.


How many yards of muslin will you need to make a cathedral quilt?

The amount of muslin needed for a cathedral quilt depends on the quilt's size and design. Generally, for a standard queen-sized cathedral quilt, you might need around 5 to 7 yards of muslin for the quilt top and additional fabric for the backing and binding. It's best to consult a specific pattern for exact yardage requirements. Always consider purchasing a bit extra to account for shrinkage or mistakes.


How many 8 x 8 squares does it takes to make queen size quilt?

Well, honey, a queen size quilt typically measures around 90 x 108 inches. So, if you're using 8 x 8 inch squares, you would need around 135 squares in total (90/8 = 11.25 and 108/8 = 13.5, so 11 x 13 = 143 squares, but you might need to adjust depending on your quilt design). Just remember, it's always better to have a few extra squares than to be short!


How much patience do you need to sew a quilt?

It depends. A quilt made with just a couple of fabrics and large blocks might be completed in a weekend, while an elaborate applique quilt might take a year or more. Just take into consideration your skill level and amount of time you are willing to give the quilt.


How much fabric are you supposed to use?

In order to know how much fabric is needed to make a quilt, you need to look at the instructions for the quilt that you are making. In order to make a quilt, you have to have instructions. They will tell you how much fabric you will need on the packages.


Patchwork Quilt Fabric?

form_title= Patchwork Quilt Fabric form_header= Create a beautiful patchwork quilt. What dimensions would you like the quilt?*= _ [50] Have you ever made a quilt before?= () Yes () No What types of fabric do you need?*= _ [50]


What is a sewing notion?

I am assuming a notion to quilt. If you heard someone say they have a notion to quilt that could mean that they are wanting to make quilts, or want to start quilting etc. A quilting notion is something used in the creation of making a quilt. Threads, rulers, templates, making pens, etc are considered a quilting notion.


How much does thread cost?

it cost about 28 dollars for a 18 pack. so all together it depens how much you need.


How do you hand quilt?

If putting your hand stitched quilt in the washing machine frightens you, I would recommend hand washing it and letting it air dry. Usually it takes a long time to dry because of all the layers, so try to squeeze out as much water as possible.


How much thread do you need for good seal on galvanized pipe?

3 to 5 turns by hand then 2 by wrench


How can you hold a quilt square on wall to look at before sewing quilt?

You can tape a large piece of flannel to the wall and arrange your blocks on the flannel. 100% cotton quilt squares hold quite nicely to flannel - no need to pin and easy to rearrange.


Where do you place the bobbin when you need to refill it with thread *?

place spool of thread on spool pin