answersLogoWhite

0

If you are referring to panels that look like ceramic tile, I would not attach this directly to studs as it is too thin and flexible. It should have more support than what studs on 16" centers can provide. Use a tile board adhesive to apply the board over primer finished drywall.

If this is concrete board used as a substrate for tile, use cement board screws. They have a fluted end that acts as a drill bit to cut through the board, making it easier to penetrate.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How can I find studs in my wall?

To find studs in your wall, you can use a stud finder tool. Simply run the stud finder along the wall until it indicates the presence of a stud. You can also look for visual clues such as nail heads or electrical outlets, which are typically attached to studs.


What is stud?

A stud is a supporting wall post or a rivet in a wall.


How can I locate wall studs effectively?

To locate wall studs effectively, use a stud finder tool to detect the wooden beams behind the wall. Slide the stud finder horizontally across the wall until it indicates the presence of a stud. Mark the location and continue this process to find additional studs. Alternatively, look for visual clues such as electrical outlets, which are typically attached to studs.


How to hang a bike on the wall for storage?

To hang a bike on the wall for storage, you will need a bike rack or wall mount specifically designed for this purpose. First, locate a sturdy wall stud where you want to hang the bike. Use a stud finder to find the stud and mark its location. Next, install the bike rack or wall mount according to the manufacturer's instructions, making sure it is securely attached to the wall stud. Finally, lift the bike onto the rack or mount, ensuring it is stable and secure before letting go.


How can I find a stud in a plaster wall?

To find a stud in a plaster wall, you can use a stud finder tool that detects the wooden beams behind the wall. Simply run the stud finder along the wall until it indicates the presence of a stud. You can also try tapping the wall lightly and listening for a solid sound, which indicates a stud.


Should NM or armored cable be installed in a wall stud and at least how far from the front edge of it?

Yes and half the stud width.


How can I locate a wood stud in a wall?

To locate a wood stud in a wall, you can use a stud finder tool. Move the stud finder along the wall until it indicates the presence of a stud. You can also look for visual clues like nails or screws in the wall, which are often placed into the studs.


How do you locate stud in wall?

With a stud finder, most studs are on 16 inch center so measure from an outside corner 16 and you should be close. Look for dimples where nails are not completely covered or have popped the finish. Sheetrocked wall, you can tap on the wall and it will sound more solid over the stud.


How can I effectively use a stud finder to locate a stud in the wall?

To effectively use a stud finder to locate a stud in the wall, first turn on the stud finder and place it flat against the wall. Slowly move it horizontally until it indicates the presence of a stud. Mark the edges of the stud with a pencil to accurately locate its center.


How can I properly screw in wall hooks to ensure they are securely attached to the wall?

To properly screw in wall hooks, first choose the right size hook for the weight of the item you plan to hang. Use a stud finder to locate a stud in the wall for added support. Mark the spot where you want to place the hook and drill a pilot hole slightly smaller than the screw. Then, screw in the hook firmly using a screwdriver or drill. Make sure the hook is level and securely attached to the wall.


How can I securely install a wood TV wall mount in my living room?

To securely install a wood TV wall mount in your living room, follow these steps: Choose a sturdy wall stud to mount the bracket onto. Use a stud finder to locate the stud and mark its position on the wall. Drill pilot holes into the stud at the marked locations. Attach the mounting bracket to the wall using screws that are long enough to reach the stud. Make sure the bracket is level before tightening the screws. Mount the TV onto the bracket according to the manufacturer's instructions. Double-check that the TV is securely attached before letting go.


How to find studs in a wall using a stud finder?

To find studs in a wall using a stud finder, turn on the stud finder and place it flat against the wall. Slowly move it horizontally until it indicates the presence of a stud. Mark the location and continue to find other studs by moving the stud finder along the wall.