answersLogoWhite

0

Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you change the ignition switch on a 1997 Chevy Camaro?

You will need to remove the retaining ring from the top of your 1997 Chevy Camaro ignition switch. The ignition switch will slide out. Remove the wiring harness. Reverse the process to install the new ignition switch.


If your 1997 Chevy Cavalier won't start key but will if you jump starter is it in the ignition switch?

yes


How do you remove the ignition switch in a 1997 firebird?

To remove the ignition switch in a 1997 Firebird, first disconnect the negative battery terminal to ensure safety. Then, remove the steering column cover by taking out the screws. Next, locate the ignition switch, which is usually mounted on the steering column, and disconnect the wiring harness. Finally, unbolt the ignition switch and carefully remove it from its housing.


Remove the 1997 c280 ignition pack?

Steps to replacing 1997 Mercedes-Benz C280 ignition switch?


How do you take out and install a switch ignition?

my granddaughter has a 1997 GEO prism LSI. i need to know how to remove the ignition switch


Where is the ignition control module 1997 Chevy cavalier 2.2 L?

where is the ignition control module loacted on a 1997 chevy cavalier


How do you remove the ignition key cylinder in a 1997 Virago?

i have a 1996 varago..to remove the ignition switch you must remove the head light Lind's and all that is inside will be able to see the screws that holds the switch in


How do you remove ignition switch from a 1997 Pontiac trans sport?

To remove the ignition switch from a 1997 Pontiac Trans Sport, first disconnect the negative battery cable to ensure safety. Next, remove the steering column covers by unscrewing the screws holding them in place. Then, locate and disconnect the wiring harness from the ignition switch, and unscrew the ignition switch from its mounting bracket. Finally, carefully pull the switch out to complete the removal process.


How do you change the ignition switch in a 1997 Honda CR-V?

In order to replace the ignition switch in a 1997 Honda CR-V, you must first unplug the ignition switch power source. Unscrew the cover panel, remove the bolts holding the switch, and pull the switch out of the column. Replace the old ignition switch with the new ignition switch, return the bolts and screws, and reconnect the power source.


How do you change a ignition switch for a 1997 Chevy cavalier?

Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder


How do you remove the ignition switch on a 97 Toyota T-100?

To remove the ignition switch on a 1997 Toyota T-100, first disconnect the negative battery cable to ensure safety. Then, remove the steering column cover by unscrewing the screws that hold it in place. After that, locate the ignition switch, disconnect the wiring harness, and remove the screws securing the switch to the column. Finally, pull the ignition switch out to complete the removal process.


How do you remove a 1997 cavalier ignition key cylinder?

Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder