Oil Pump Removal & Installation4.6L and 5.4L Engines1. Remove the timing chain. 2. Remove the oil pan. 3. Remove the three oil pump screen and cover bolts, then remove the screen and cover. 4. Remove the oil pump screen and cover spacer. 5. Remove the four oil pump mounting bolts, then remove the oil pump from the engine. To install: 6. Clean and inspect the mating surfaces. 7. Install the oil pump and loosely install the four oil pump mounting bolts. Tighten the four oil pump bolts in sequence to 71-106 inch lbs. (8-12 Nm). 8. Install the oil screen and cover spacer to 15-22 ft. lbs. (20-30 Nm). 9. Install the oil screen and cover, then install the three oil pump screen and cover bolts. Tighten the bolts near the oil pick up screen to 15-22 ft. lbs. (20-30 Nm) and the bolts at the opposite end of the pick-up to 70-106 inch lbs. (8-12 Nm). Install the timing chains, then install the oil pan.
how do you change the oil filter on 2006 f250 diesel?
You take it to a Ford service department.
According to the 2008 Ford F-250 diesel supplement : With engine oil filter change : ( 15.0 U.S. quarts )
Every other oil change, drain water valve once a month.
According to the 2008 Ford F-250 diesel supplement : 15 quarts ( 14.2 liters ) with engine oil filter change on the 6.4 L diesel engine
14qts Rotella T 15W40
15w40
10qts
Mine takes 10 quarts with an oil change using a new oil filter. That's a whole lotta oil!
15 qts including the filter change.
your oil cooler is leaking
BLACK. New diesel engine oil almost instantaneously turns black. You should not be concerned. To gauge the effectiveness of oil performance, send to a lab for analysis.