The brake controller has to be hooked up to a power source. The controller also has to be hooked to the brake switch or tail lights, then to the plug for the trailer.
The connector for the brake controller is under the dashboard on your right close to the driver's foot rest. If you buy the genuine Toyota wiring harness with the connector then it will not take you more than a minute or so to install it as it fits right into the wiring harness that leads away from the brake controller. Make sure that everything is fixed in place and not lose.
The 1997 Chevrolet Blazer OBD 2 port is on lower edge of dash; right of parking brake
No.
YES
You have to have the wire that connects the controller conected to the PS3 and then you hold the middle button
I am trying to hook up a brake controller on my 1998 k1500. I cann't find the brake light wire on the truck under the dash or the hood. I need help!
you can't hook up a wireless control to the xbox 360 just push on the buttom on the middle that depends did you mean a 360 controller or a PC gaming controller 360 controller-yes press the connect button on front of xbox and then on controller. PC controller-no has to be xbox 360 compatible
Yes, but you have hook it up.
You'll need to purchase a brake module. There are several types, and all come with complete installation instructions.
you plug the end into the bottom of the controller
Take a controller that is appropriate for you, then find a way to hook it up to a wireless USB
if you have a plug on the back of your truck then there is a blue plug over top of the emergency brake pedel on top of the 50 way wire harness and your truck should have came with the plug for the electric brakes in the glove box and the wires are marked as to where they go where you hook them to your trailer brake controller i hope this helps you Allen if you have a plug on the back of your truck then there is a blue plug over top of the emergency brake pedel on top of the 50 way wire harness and your truck should have came with the plug for the electric brakes in the glove box and the wires are marked as to where they go where you hook them to your trailer brake controller i hope this helps you Allen