Interior light for astra mk3 not coming on when door opened or headlight switch pulled.
where you turn the headlights on pull the nob out
Answer http://manualfile.com/Automotive/Opel/
To change an interior light bulb in a Vauxhall Astra, first ensure the vehicle is turned off. Gently pry the light cover off using a flathead screwdriver or your fingers, depending on the design. Remove the old bulb by twisting it counterclockwise, then insert the new bulb by twisting it clockwise until secure. Finally, replace the light cover, ensuring it clicks back into place.
the interior light switch is the button that you turn your headlights on with, you have to pull it out to turn it on
how do you change a parking light bulb on a vauxhall astra 06 plate please.
To change the rear light bulb on a Vauxhall Astra 1.7 CDTi van, first, open the tailgate and locate the rear light assembly. Remove the screws or clips securing the light assembly and carefully pull it out. Twist the bulb holder counterclockwise to release it, then remove the old bulb and replace it with a new one. Finally, reassemble the light assembly and test the new bulb to ensure it’s working properly.
To change the rear brake light on a 2005 Vauxhall Astra, start by opening the tailgate and removing the plastic cover or trim panel from the rear light assembly, if necessary. Locate the brake light bulb holder, twist it counterclockwise to remove it, and then pull out the old bulb. Replace it with a new bulb, reinsert the holder, and test the light before reassembling any covers.
Some things Wrong! Get it checked. Take it for a service!
The light is on because there is a fault somewher. To turn the light of you fix the fault.
Prise the holder out of the bumper, then the bulb is accessible
i get a wee car on a bendy road light,what is it? This is Traction Control Light, to do with the Braking system,
To reset the service light on a 2008 Vauxhall Astra, turn on the ignition without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn the ignition off and back on to confirm that the service light has been reset. If the light remains on, repeat the process.