A vinyl repair kit is usually the best option to repair small rips. If the rip is too large for a conventional patch, the entire vinyl piece may need replaced.
Ours just ripped open on the highway. Do not try to repair, as it will rip again at the wrong time.
It depends on the type of floor that you are putting down the vinyl flooring on top of. If it is concrete, then make sure it is clean, dry and repair any cracks or holes. If the old vinyl flooring is in good repair then just put the new vinyl flooring over it or use an embossing leveler for slightly worn vinyl flooring. If the old vinyl flooring is in very poor shape remove it completely. Plywood underlayment can be used for other types of flooring that you will put new vinyl flooring down on top of.
A 380sl does not have a sunroof, it has a hard top.
Vinyl is a synthetic material designed to be very durable while maintaining good flexibility. It has uses in both the manufacturing industry and the common household. Everything from clothes to upholstery, tarps to hardware has been made from various types of vinyl. Most often for the everyday consumer, vinyl will appear either as upholstery or flooring. While very tough, vinyl does rip and tear from time to time. Fortunately, it is a man-made material and can be easily repaired. In order to repair the vinyl there are two items that you should have. The first is a vinyl adhesive. This is sold at hardware and craft stores. The second item to have is a scrap piece of the vinyl that you are trying to repair. If you don’t have an extra piece, you will want to find a piece that is the same or very similar in color and texture at a hardware, craft or fabric store. First, take the vinyl patch and cut it to be about one-half to one inch larger than the tear you are trying to repair. Take the cut piece and place it inside of the tear so that the finished side is facing up. Try and center it underneath of the tear and try not to rip the vinyl any more than it already is. Now take the vinyl adhesive and apply it liberally to the bottom of the flap that is the tear and to the top of the vinyl patch you have inserted. Also carefully apply the adhesive to the edges of the tear. Press the vinyl flap down and make sure it is flat. It should be adhering to the patch you inserted underneath. Make sure to wipe away any excess adhesive that may have gotten on the vinyl. Once it is very flat, allow the adhesive to dry for at least twenty-four hours. This will allow it to cure. Make sure not to touch the area in any way before then. Depending on the type of vinyl and whether there is a grain or not, you may need to purchase a repair kit that has other finishing options. Specifically, there are heat-activated finishes and textured pads that can help to add extra shine, fill in small gaps, and match the pattern of the vinyl. Repairing torn vinyl is not a difficult task, but it is important to be meticulous and thorough when performing the repair.
No, you should not.
The best paint to use in order to change the color of a vinyl top table is vinyl spray paint. You will first have to clean and prime the table top.
the convert top motor is in the trunk behind the vinyl top collector or the vinyl top shoot. you cant miss it.
Installing vinyl siding is not hard to do by yourself. You will need a few inexpensive tools and learn the basics which begin with the flashing, window and door trims, eaves, soffits before you ever get to the vinyl panels. The most important thing to remember is that water runs down, so you must make sure that your overlapping is always on top of the one below.
yes but only up to 3 layers
Feldo manufactures vinyl windows. You can purchase vinyl windows at Home Depot. Addition information is available at: vinylwindowmanufacturers.net/
There are many solutions to be found online. Ehow has several step-by-step directions which can be found here: http://www.ehow.com/search.aspx?s=repair+convertible&Options=0&x=0&y=0
remove vinly top retaining strips via pulling and prying until you've destroyed all the clips since its virtutally impossible to salvage such beautiful examples of craftsmanship made by GM. get exacto knife...score top....rip off...get paint job....peace