How to replace dash bulbs in peugeot 406 1999?

Answer 1

You remove the plastic cover behind the headlight, there is a plastic connector (two or three pin) remove this, undo the circlip holding the lamp in. Then remove bulb You remove the plastic cover behind the headlight, there is a plastic connector (two or three pin) remove this, undo the circlip holding the lamp in. Then remove bulb

Answer 2

well,

above license plate there are two plastic covers,

using a screw, knife or a key you can remove them,

then you just grab the old bulbs and remove them easily,

you replace the old with the news and you test them by

turning on your lights.

If one of them or none is not lighting you have to close the lights, remove key and

then remove the new bulbs and place them again with 180 an degrees change.

When your bulbs working, you place again the covers easily (without break them) and you're done.

That's all.

[I've made this change to my Peugeot 406, '98 with blue led bulbs]

Answer 3

Begin by removing the instrument panel cover. Take hold of the dashboard lightbulb, push in and turn at the same time. The lightbulb will come out. Reverse the process to install your new dashboard lightbulb.