answersLogoWhite

0

Timing is fixed and determined by flywheel. The only way for timing to be off is if the flywheel key has sheared. As the magnets on the flywheel pass the armature (coil), a spark is sent, end of story.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you set the timing on a Briggs Stratton 19.5 hp lawn tractor engine?

To set the timing on a Briggs & Stratton 19.5 hp lawn tractor engine, first ensure the engine is off and cool. Remove the crankcase cover and locate the timing marks on the flywheel and the engine block. Align the timing marks to the specified position, typically at TDC (top dead center) for the compression stroke. Finally, reassemble any removed parts and check the timing by starting the engine and listening for smooth operation.


How do you set the timing on 17hp HOV Briggs and Stratton?

The timing is not adjustable. The only way the engine can be out of time is if the keyway between the crankshaft and the flywheel is sheared. If it is in place and in good shape the engine will be in time.


How do you set the timing on 12.5 hp Briggs?

To set the timing on a 12.5 hp Briggs & Stratton engine, first ensure the piston is at top dead center (TDC) on the compression stroke. Remove the flywheel cover and locate the timing key or mark on the flywheel and the engine case. Align the timing mark on the flywheel with the timing mark on the engine, ensuring the key is not damaged. If necessary, adjust the position of the ignition coil to ensure the spark plug fires at the correct timing, typically just before TDC.


How do you set ignition timing on a 14.5 ohv Briggs?

To set the ignition timing on a 14.5 OHV Briggs & Stratton engine, first, remove the flywheel shroud and locate the timing key on the flywheel. Use a dial indicator to find top dead center (TDC) on the piston, then align the timing mark on the flywheel with the mark on the engine block. Adjust the position of the ignition coil if necessary, maintaining a gap of about 0.010 inches between the coil and the flywheel. Finally, reassemble all components and test the engine to ensure proper operation.


How do you set timing on a 110 cc engine?

how do you set timing on 110cc engine


How do you set the timing on a Yamaha TY 175?

To set the timing on a Yamaha TY 175, start by removing the ignition cover to access the flywheel. Use a dial gauge to find the top dead center (TDC) of the piston, then align the timing marks on the flywheel with the mark on the engine case. Adjust the ignition timing by loosening the stator plate screws and rotating it until the timing light indicates the desired advance. Finally, tighten the screws and recheck the timing to ensure it is correctly set.


How do you set timing on vortex 1998 Tahoe?

You MUST have a engine scanner to set the timing. The timing on that engine is computer controlled.


How do you set the dist timing on a 1999 gm 7.4 engine?

You can set the base timing by ear, But to be able to get the check engine light to go out and to set the timing were it is supose to be requires a engine scanner. The computer controlls the timing on that year engine.


What is the point gap on a Briggs model 90502?

The point gap on a Briggs & Stratton model 90502 engine is typically set to 0.020 inches (0.508 mm). This gap ensures proper ignition timing and optimal engine performance. Always refer to the specific service manual for your engine model for the most accurate specifications.


How do you set the timing on a 1999 Chevy siverado 5.7 liter engine?

That requires an engine scanner to set the timing.


How do set the timing on a 2001 Chevy 5.3?

It requires an ENGINE SCANNER to set the ignition timing on that year of engine.


How do you set timing on hei engine?

With a timing light.