Floor tile are always thicker and the clay the tile is made from on the back of the tile will be dark. I'm sure that's right but can't back it up with proof.
Yes, you can use floor tile on the wall. It can be heavy, but if you use a high quality latex fortified thin set (NOT mastic) you should have no issues. It also should be put onto cement board for best results. In the past using floor tile on the wall was an issue because trimpieces were not easily available. With trends changing, you are seeing more with bullnose and you can always use ceramic trim like schulter. Now, you CANNOT put wall tile on the floor. They are often made with white clay and other more bridle ingredient's. Check the box, it will tell you what it is rated for.
If the tiles are 12x12" you need 640 of them...if not, on the tile box it will tell you how many ft. you can do per box.
The weight of box floor tile can vary depending on the material and size. Typically, a standard box of ceramic or porcelain tiles weighs between 50 to 70 pounds (23 to 32 kg) for a box containing around 10 to 15 square feet of tile. For other materials, like vinyl or stone, the weight can differ. Always check the manufacturer's specifications for the most accurate information.
A big box that sits on the floor and does what you tell it to do
0.13x0.13=0.017 sqm/tile x14=0.23 sqm/box 121: 0.23= 526 packs
How much 16x16 of ceramic tile is required to cover a 170 square foot kitchen floor
Make sure your tile patterns and colors are correct when you pick out the boxes of Tivoli tile. We just opened the last box in our project and there is a factory error in the pattern. Of course, the tile is now discontinued, so we are stuck with a whole box of bad tile.
it moves the mystery box to some where else you should be able to tell where it has gone by the map on the wall near the box the green light is the box
If 12x12 is 144... There would be 144 tiles in a box right?
It takes more force to slide a heavy box across carpet compared to a tiled floor because carpet provides more resistance due to its higher coefficient of friction. The rough texture of the carpet surface increases the friction between the box and the carpet, making it harder to move the box. On the other hand, the smooth surface of the tile floor reduces friction, requiring less force to slide the box.
The best outlet extender for tile installations is a recessed outlet box.
The number of boxes required is575/number of square feet covered by the tiles in one box .