Yes it is easily damaged in general.
I have found that drywall screws and roofing nails work remarkably well for this.
Yes but if you hit it hard enough it will break.
Punching through drywall can be relatively easy, as it is a soft material. However, the difficulty can be affected by factors such as the thickness of the drywall, the presence of studs or other obstacles behind the drywall, and the force applied when punching.
squeezing the site too hard
Usually that will result in a puncture although if the pressure or sharpness isn't sufficient to puncture the skin it will probably cause some bruising.
Rip it off one side with a crowbar, then pull hard and the whole bosrd will come off.
White drywall is just normal everyday drywall.
Hello! Just a couple of guesses as to why the drywall compound is coming off the drywall while you are attempting to prime: First, is the compound totally cured; that is, is it hard and dry? Second, are you using a primer that is specifically designed for new drywall? Lastly, maybe too much paint, or even overworking the paint could saturate the compound, turning it back into a wet goop.
Try doing something to distract yourself. -ebush another view: find out if your body is deficient of something found in drywall (if that is possible): find a very big rubber band and put it around your wrist and every time you think about drywall, snap yourself really hard.
Rip it off one side with a crowbar, then pull hard and the whole bosrd will come off.
A drywall dimpler is a drill bit used to countersink a drywall screw to the proper depth without breaking the drywall paper.
The best types of nails to use for drywall installation are drywall nails or drywall screws. Drywall nails are specifically designed for this purpose and have a smooth shank to prevent damage to the drywall. Drywall screws are also commonly used and provide a strong hold. Both options are suitable for securing drywall to studs or joists.