There is no difference ,both are same
tintu puthur joseph
A micrometer (or micrometer screw gauge) measures the volume of a screw.
A micrometer screw gauge is commonly known as a micrometer. This is a form of calipers used for measuring small dimensions. Screw gauge in extensively used in the engineering field for obtaining precision measurements. The article describes the principle and main parts of a basic micrometer screw gauge.
*Micrometer have a rotary handle and whereas vernier have a slider. *Micrometer is for measuring diameters while vernier is for measuring inside & outside diameter as well as depth. *Least Count of Vernier Caliper is 0.02mm *Least Count of Micrometer is 0.01mm
the inventor of micrometer screw gauge is William Gascoigne.
To measure the diameter of a wire using a micrometer screw gauge, place the wire between the anvil and the spindle of the micrometer. Gently close the spindle by rotating the thimble until it comes into contact with the wire. Read the measurement displayed on the thimble and sleeve to determine the diameter of the wire.
both are used in accurate measuring in a wide range of environments
The distance between each line of the body is equal to 0.5 mm. Gauge the distance between each line is equal to 0.01 mm.
A micrometer screw gauge is necessary for measuring expansion because it provides precise and accurate measurements to determine the small changes in length that occur due to expansion. The micrometer screw gauge has a fine scale and a thimble that allows for consistent and repeatable measurements, making it suitable for measuring small increments of expansion.
A micrometer screw gauge is used to measure small dimensions with high precision. It consists of a screw mechanism that moves a calibrated scale when measuring the dimensions of objects. It is commonly used in fields such as engineering, manufacturing, and science where accuracy is important.
The anvil on a micrometer screw gauge is used to support and hold one end of the object being measured. It helps to ensure that the object is positioned correctly for accurate measurements to be taken by the gauge.
Yes, it is possible
The micrometer screw gauge was invented by William Gascoigne, an English mathematician and astronomer, in the 17th century. He developed it as a precision instrument to measure small distances accurately.