P0300 = Random/Multiple Cylinder Misfire detected. Could be worn out spark plugs, bad spark plug wires, bad distributor cap/rotor, contaminated fuel (water), incorrect fuel pressure, dirty fuel filter, faulty fuel pump,
Trouble code P0300 means: Random/multiple cylinder misfire detected.
P0300=random misfire. If this is the only code displayed I would start with the basics, check the spark plugs, the fuel filter, then progress to a fuel pressure test. Also check for fuel contamination (water).
P0300 multiple cylinder misfire. You need to check plugs, wires, coils, injectors........
One way would be for the check engine light to illuminate and spit out a code P0300 for a random misfire.
The P0300 code indicates random engine misfiring. The P0303 and P0304 codes indicate the cylinder #s where excessive misfiring is occuring.
If the check engine light is on, the computer has detected a malfunction and set a code. You will need to have the code scanned to know possible causes.If the check engine light is on, the computer has detected a malfunction and set a code. You will need to have the code scanned to know possible causes.
i think no, because dtc p0300 comes when the engine misfired detected, engine tune up and injector cleaning are need to perform when this dtc p0300 was set
P0300 is multiple or random cylinder misfire. No start can be dead battery, failed starter, no fuel, no fuel pressure, computer or sensor malfunction, internal engine failure, etc.
Yes. Trouble code P0300 means: Random/multiple cylinder misfire detected
It comes on when the engine computer detects a malfunction and sets a code.
Have the code read, that will tell you.
bad o2 sensor on left bank