0
What else can I help you with?
A foot that allows the needle to sew from side to side is a?
A foot that allows the needle to sew from side to side is a zigzag foot. The foot has an open middle so that the needle can move freely from side to side.
What is the meaning of needle clamp?
The needle clamp is collar and screw device that holds the needle to the needle bar. The needle bar is the part that goes up and down as the machine sews and is in front of the pressed foot bar.
How evil is Doctor Evil?
he is as evil as a 10 foot long needle
How do you move the needle for a Bernina 1630?
To move the needle on a Bernina 1630 sewing machine, use the handwheel located on the right side of the machine. Turn the handwheel toward you (counterclockwise) to raise or lower the needle. Additionally, you can use the foot control to start and stop sewing, which will automatically move the needle as you sew. Always ensure the machine is properly threaded and the presser foot is lifted when adjusting the needle position.
What is a presser foot?
The presser foot is the prong shaped piece of metal resting where the needle passes through the garment to be sown.
Would a sewing needle embedded in the foot affect a MRI of that foot?
Yes, having a sewing needle embedded in the foot could be dangerous if you were to have an MRI. The magnetic field of the MRI machine could cause the needle to move or potentially injure the surrounding tissue. It is important to inform your healthcare provider or the MRI technologist if you have a foreign object in your body before undergoing an MRI.
How do you get glass out of foot?
First soak your foot in water which will loosen the sink around the glass in your foot. Then use tweezers or safety pin/needle sterilized in alcohol to get it out.
What supports the Seattle Space Needle?
The Space Needle's concrete foundation goes 30 feet underground. To balance its 605 foot structure, the Space Needle's concrete foundation had to be 30 feet deep because its base was limited to a 120 by 120 foot area, due to size constraints of the lot it was purchased on.
How can you remove a splinter in your foot?
Use a needle or dressmaking pin to get the end out and then pull with tweezers. Sometimes you can push them back out with your thumbnail if they are hard enough but if not then you will need to coax it out with the needle.
What is the function of the presser foot on a sewing machine?
The presser foot grabs the fabric and pulls it through.
What causes a pin or needle stick on the right side?
my right foot is like pins sticking me. and numness
What are the three major parts of upper parts of sewing machine?
The three major parts of the upper section of a sewing machine are the needle assembly, the presser foot, and the feed dogs. The needle assembly holds the needle, which pierces the fabric to create stitches. The presser foot keeps the fabric in place as it's being sewn, while the feed dogs move the fabric under the needle for smooth stitching. Together, these components ensure accurate and efficient sewing.
