answersLogoWhite

0

You can lay tiles again but make sure you buy proper mortar. You can install any kind of floating floor such as laminate, engineering wood, interlocking vinyl tile.

Your main concern should be structural integrity of existing floor, if its not falling you can do pretty much anything

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you install ceramic tiles into your kitchen floor?

First you have to pull up the old flooring. Once you have the old flooring up you have to put the tile glue on the floor, and place the tile on top of it. Then you have to grout in between each of the tiles. When you get to the edges you will have to cut the tiles to fit.


Is it necessary to prime plywood floor before installing ceramic tiles?

Ceramic tiles are normally laid on a cement base. If the floor has any flexibility at all, the tiles will wind up cracking. But if you do have to install tiles on top of wood, then yes, the wood has to be sealed because the grout is mixed with water, which can damage unsealed wood.


Can you glue ceramic tile with vinyl glue?

Not directly as the ceramic tiles will soon show through the vinyl flooring. If the ceramics are laid on a wooden floor, you must take up the tiles and overboard with 6mm plywood. If the tiles are on a concrete floor, you can leave them down and lay a latex screed on top to provide you with a smooth floor for your vinyl


Where can one find ceramic wall tiles?

Charbhuja Tiles is one of the top associations in India which is known is the Best Tiles Shop in Delhi and We are furthermore know as Best Ceramic Tile Dealers in Delhi tile suppliers, wholesalers in Delhi. In case you are searching for Tiles shop close to me your inquiry will end at our Showroom. Since we have heaps of astounding and excess variety the same. Understand more: - 09810533367


Can you lay vinyl flooring on top of another vinyl floor?

yes but only up to 3 layers


How do you clean ceramic floor tiles?

The BEST way to clean ceramic floor tile is with VINEGAR, the acid in it will take all dirt, grease and anything on top of the tile off with No GREASY feel afterwards.There are no special ways to clean ceramic tiles floors except don't use anything abrasive.


What is the proper way to dispose of damaged ceramic tile?

Remove the old ceramic tile starting at one of the edges. The best place to begin is where the old ceramic tile butts up against a different type of flooring, such as a carpet or wood floor. Chip away at the grout surrounding the old ceramic tile, using a metal putty knife and hammer. Set the putty knife on the grout and hit the top of the putty knife with the hammer. Work your way around the first tile pegged for removal.2 Slip the blade of the putty knife under the ceramic tile after loosening the grout. Apply pressure to the handle of the putty knife and pop out the old ceramic tile.3 Chip the grout away from the tiles and pop the tiles out, using the putty knife, until you have removed all of the old tiles.4 Vacuum the area with a wet/dry vacuum to remove any residue.


What is the best way to replace a kitchen floor?

This depends on the type of floor. If lino flooring it should be taken up and replaced, but tiles can be difficult to remove. Tiles can have screed over them and a new floor placed over the top.


Is there tile made out of enamel?

Enamel is a type of coating that can be applied to tiles to add durability and moisture resistance. It is not a common material used to make tiles, but rather a protective layer that is often applied on top of ceramic or porcelain tiles.


How can I install heated tile flooring in my bathroom?

To install heated tile flooring in your bathroom, you will need to first prepare the subfloor by ensuring it is clean and level. Next, install the heating mat or cables according to the manufacturer's instructions. Lay the tile on top of the heating element using thinset mortar. Finally, grout the tiles and connect the heating system to a thermostat for control. It is recommended to consult a professional for proper installation.


What is a good adhesive for ceramic tiles?

You should not adhere tile on top of tile. It is much better to rip it up and install on a secure surface and make sure it is smooth level. If you find yourself in a situation where you can not/should not remove the tile (e.g. if there is asbestos tile underneath or if there is a radiant heat systems under and you don't want to risk breaking/puncturing it), then the alternative is to pour 1/2" (or more) of self leveling cement and then install on top of that.


How can I properly install tile under cabinets in my kitchen?

To properly install tile under cabinets in your kitchen, follow these steps: Remove the existing flooring. Measure and cut the tiles to fit the space. Apply thin-set mortar to the subfloor. Lay the tiles in a staggered pattern. Allow the mortar to dry completely. Grout the tiles and clean off any excess grout. Install the cabinets on top of the tiled floor. Make sure to use the proper tools and materials for a successful installation.