The best way is to use a heat gun to soften the glue under the lino and lift with a scraper or similar tool.Only work small area at a time as glue can harden again before you get a chance to lift it.You can also use a spade to chip away at it,depending you dont mind minor damage to surface;ie,surface to be re-covered.No easy way on this task.
Yes, if the adhesive is smooth, no lumps and if you use a compatible glue, not thinset cement
There are several ways to use linoleum in a sentence. One sentence for the word is; John is working all day putting new linoleum in the kitchen.
you can but it will break up fast,your better off getting a floor scraper and remove your old flooring.but with doing that you may have to level your floor(lumps left from glue will make an even floor impossible).go to your local hardware store and ask for a self leveling cement premixed ready to go.
Hot hide glue mixed with 10% glycerin for flexibility.
To effectively remove old linoleum from a wood floor, you can start by heating the linoleum with a heat gun to soften the adhesive. Then, use a putty knife to gently lift and scrape off the linoleum. Be careful not to damage the wood floor underneath. You may also use a solvent or adhesive remover to help loosen the linoleum. Remember to ventilate the area well and wear protective gear when using chemicals.
To remove old linoleum flooring effectively, start by cutting the linoleum into manageable sections with a utility knife. Then, use a heat gun or hairdryer to soften the adhesive underneath and carefully peel off the linoleum. Finally, use a floor scraper to remove any remaining adhesive residue. Be sure to wear protective gear and work in a well-ventilated area.
To efficiently remove old linoleum flooring, start by cutting the linoleum into manageable sections with a utility knife. Then, use a heat gun or hairdryer to soften the adhesive underneath and carefully peel off the linoleum. Finally, use a floor scraper to remove any remaining adhesive residue. Be sure to wear protective gear and work in a well-ventilated area.
Yes and no. If the old linleum is peeling and seems loose then I would pull it up. If however the old linoleum is still in good shape and isn't peeling then yes, but steps must be taken. if it's on a cement floor then you need to coat the floor with a bonding agent or use a higher performing modified thinset. If the linoleum is on a wood subfloor I'd just staple metal lath right over the linoleum and tile it. I would use a bonding agent that most specialized tile stores sell. since there are so many just go to a tile store near you and ask them what they have.
To efficiently remove old linoleum flooring, start by cutting the linoleum into manageable sections with a utility knife. Then, use a heat gun or hairdryer to soften the adhesive underneath and carefully peel off the linoleum. Finally, use a floor scraper to remove any remaining adhesive residue. Be sure to wear protective gear and work in a well-ventilated area.
To efficiently remove old linoleum flooring from your home, you can start by scoring the linoleum with a utility knife and then using a heat gun or hairdryer to soften the adhesive underneath. Once the adhesive is softened, you can use a putty knife or floor scraper to carefully lift and remove the linoleum. Be sure to wear protective gear and work in well-ventilated areas to avoid inhaling any fumes.
you have to put more glue on it, it will glue itself to the old glue, and be easier to remove
As long as the only linoleum is not peeling or loose go ahead and put the new one right on top of it this way you avoid the risk of asbestos and all the mess of riping up the old floor.