Alkyd and enamel paints are both used for similar applications, but they differ in composition and characteristics. Alkyd paints are oil-based and contain synthetic resins, which give them durability and a smooth finish, making them ideal for surfaces like wood and metal. Enamel paints, on the other hand, refer to a type of paint that dries to a hard, glossy finish and can be either oil-based or water-based. While enamel can include alkyd formulations, it generally emphasizes the finish quality rather than the specific resin type.
paint jobs
They can be the same cost. Depends on brand
Enamel paint is oil or alkyd. Alkyd paint is probably the most well known type of oil paint available on the market. The word alkyd actually refers to the synthetic resin used as a binder in the paint. This would be the oil in the paint, most commonly vegetable oil. Alkyd paints also come in a wide variety of finishes making it ideal for multiple different projects. Alkyd paint is very resistant to normal wear and tear. Thus, this type of paint is used commonly in "high traffic" type areas. This would include doors and trim within a home and also items that would need painting in the kitchen and bathroom such as cabinets. The alkyd paint will hold up to all the abuses that may come its way. Acrylic enamel is a water based full gloss usually for interior surfaces only. The gloss is nearly as high as gloss enamel but it is not quite as durable. One advantage is that if you are using white it does not discolor over time as much as alkyd based enamel. Also from a professional point i have never found the finish to be as good as enamel with less than three coats.
Alkyd enamel paint is durable, provides a smooth finish, and is resistant to wear and tear. It also dries quickly and is easy to clean, making it a good choice for home renovation projects.
It won't adhere properly if you do. You'll find it peeling of almost as soon as it dries.
There are different kinds of satin paint - you'd have to know if it was latex, oil, enamel, alkyd etc.
Alkyd Enamel is really old school primer. I personally would sand it with 400 wet/dry and put a coat or two of an epoxy primer over it then you can put just about any type of paint on it. If you don't want to do that, probably your best best would be n Enamel top coat , You can still get Automotive Enamels but they will be expensive because the EPA is really cracking down on the solvent based finishes. Color selection may also be limited but they are out there. And even if you use an enamel , you should clear coat it with a Urethane Clear. IT helps protect the base coat from fading and gives a great gloss when buffed. I have painted a lot of cars with Enamels and they go on fairly heavy so watch out.
There is no difference. They are one in the same.
Traditionally, alkyds are found in solvent-based paints that must be reduced with paint thinner or mineral spirits. "Waterborne alkyd" is a generic term to refer to an alkyd resin that can be used in a water-thinnable paint. Because alkyds are not miscible with water, a chemical modification is sometimes used to produce a hybrid alkyd resin - often acrylic/alkyd or urethane/alkyd - that is compatible with water. These hybrids are often categorized generically under the term waterborne alkyds. A pure alkyd can be emulsified in water using appropriate surfactant combinations. This type of surfactant-stabilized alkyd emulsion has been sometimes referred to as an "alkyd latex." Different resin manufacturers use varying terminology to describe waterborne alkyds with the terms alkyd emulsion, alkyd dispersion, and alkyd latex being among the most common.
Primer made with alkyd base.
Enamel lamellae extend from the Dentino-Enamel Junction to the outer surface. Tufts are projections from the Dentino-Enamel Junction for a short distance due to the changes of enamel rods arising from the scalloped junction.
Enamel lamellae are defects in tooth enamel that result from incomplete mineralization, while cracks in enamel are actual fractures in the enamel surface that can extend into deeper layers. Enamel lamellae are usually superficial and do not necessarily compromise the structural integrity of the tooth, whereas cracks can weaken the enamel and potentially lead to tooth sensitivity or decay.