8d-10d cement coated if toenailing, 12d-16d cement coated if nailing through a plate.
studding
Sheetrock nails may be popping out of the wall due to improper installation, moisture issues causing the sheetrock to expand and contract, or structural movement in the building.
Corbels are a type of bracket that is used as a support system for an exterior wall of a building. Part of the corbel extends past the exterior wall, and is covered with a cap, called a console. The consoles are usually made of stone and usually have some kind of decorative design etched into them.
Drywall nails may be popping out of the wall due to improper installation, moisture issues, or structural movement causing the nails to loosen.
earth stones and wood compressed into blocks.
it is a wall kind of thing that blocks the water from going to the other side.
To secure a 2x6 stud to the top and bottom plates of an 8-foot wall, you typically need a minimum of two nails at each end of the stud, which totals four nails. However, building codes often recommend using three nails per connection for added strength, increasing the total to six nails. Therefore, for optimal stability, you would generally use six nails to hold a 2x6 stud to the plates.
They Werent
This is the wall which they are building.
Ashlar
used in building bricks for the house's wall :D
No make sure you use wall mirrors nails.