0
What else can I help you with?
Where do you add oil to a Briggs and stratton edger?
front of engine block idiot
Craftsman Gas Edger 29cc 4 cycle what oil do you use?
I question your cc's, but a 30W of SG or greater rating should suffice.
Where is the 'oil plug' for changing oil on the 3.5 craftsman edger 536.772100?
The oil drain plug is located on the bottom of the engine underneath the edger. It takes 20 ounces of SAE30 weight oil. I recommend you use synthetic oil in any air cooled engine. Change the oil every 25 hours. Click the link to download an owners manual.
How much oil goes in craftsman 179 cc engine?
Just add enough oil to reach the full mark on the dipstick.
How much oil in a craftsman Briggs and Stratten 4.75?
The total capacity is 20 ounces but not all the oil will be removed when you drain it. Drain the oil and then add 15 ounces. Check the level and add as necessary to reach the full mark. Do not overfill.
How many cycles does a Craftsman Briggs Stratton 550 158 cc 27 lawnmower?
If you have to add oil to the fuel, it is a 2-cycle engine. If you have to add oil through a filler spout into the crankcase, it is a 4-cycle engine.
What is the fram cross reference for a craftsman 24606 oil filter?
What is the cross reference for Craftsman 24606 oil filter to Fram
How much oil in a 179cc craftsman snowblower engine?
A 179cc Craftsman snowblower engine typically requires about 20 ounces (or 0.6 liters) of oil. It's important to check the owner's manual for the specific model to ensure the correct oil type and capacity. Always check the oil level using the dipstick and add oil as needed to keep the engine running smoothly.
What kind of oil do i use for a 3.5 Briggs and stratton edger?
For a 3.5 Briggs and Stratton edger, it's recommended to use SAE 30 weight oil for warmer temperatures or 10W-30 for cooler conditions. Always check the owner's manual for specific oil recommendations, as it may provide guidance based on the edger's operating environment. Ensure to use high-quality oil that meets API service classifications for optimal performance.
Oil necessary for craftsman 6.0 mower?
The Craftsman 6.0 Mower takes an oil that is at least 30 wt. A blended oil that is 10-30 is okay to use also.
What kind of oil for 6.6 craftsman?
"6.6 craftsman " is insufficient info. -If you expect a sensible answer, please describe it fully.
What is the oil gas ration for a craftsman chain saw?
In all Craftsman chain saws going back to at least 1990, the oil/gas ratio is 40/1.
