0
What else can I help you with?
How do I get the bobbin out of the bobbin case?
Depends on the machine brand. To determine which way to load the bobbin into the bobbin case you need to determine which way the slot is facing that the tread slides into prior to it slipping under the tension clip. Hold the bobbin case with the opening away from you with the slot facing up. If the slot on the bobbin case is facing to the left put the bobbin into the case with the thread spinning the bobbin counter clockwise. If the slot on the bobbin case faces to the right put the bobbin into the case with the thread spinning the bobbin clockwise.
What is a rhyme about Robin Hood?
Bobbin should Bobbin Could Bobbin would Bobbin wood Dobbin (a name for a plow horse) mobbing robbing sobbing good
What does the bobbin case do in the sewing machine?
to keep the bobbin in place
When was Betsy Bobbin created?
Betsy Bobbin was created in 1913.
What is the most popular neighborhood in Tallahassee Florida?
probably golden eagle or one of the Bobbin's : bobbin Brooke, bobbin mill, an so on...
What is the function of bobbin case on sewing machine?
to keep the bobbin in place
When was Young Mr. Bobbin created?
Young Mr. Bobbin was created on 1951-08-29.
Is bobbin lace a real lace?
Bobbin lace is hand made lace made by flipping the lace back and forth over the bobbin.
What are bobbin cases used for?
A bobbin case is used for sewing on a sewing machine. It holds the bobbin in place so it is able to go in the sewing machine.
What type of bobbin does singer 6038 need?
You will need a 66 k bobbin
How do you thread a bobbin jc penny 7036?
To thread a bobbin on a JC Penney 7036 sewing machine, first, place the spool of thread on the spool pin and thread it through the tension disc. Next, attach the bobbin to the bobbin winding spindle and push it to the right. Wind the thread around the bobbin a few times before pressing the foot pedal to start winding. Once the bobbin is filled, stop the machine, trim the thread, and remove the bobbin.
How do you thread bobbin bratz sew stylin sewing machine?
To thread the bobbin on a Bratz Sew Stylin sewing machine, first, ensure the machine is turned off. Place the spool of thread on the spindle, then thread it through the tension disc and guide it down to the bobbin winder. Wrap the thread around the bobbin a few times, then insert the bobbin into the winder and engage it to fill the bobbin. Once filled, place the bobbin in the bobbin case, ensuring the thread unwinds in the correct direction, and then pull the thread through the slot to complete the threading process.
