answersLogoWhite

0

What does 1998 3.5 rl aura srs light on mean what is problem

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do I check the codes from the check engine light on a 2003 Kia sedona?

You need some sort of a scanner to plug in to retrive the codes from the computer. Prefer using a Kia scanner for best results.


How do you get maintenance required light off in a 2003 Acura TL?

Not quite sure how to do it manually, but if you spend the extra couple of dollars to go to a Acura dealer they will reset all the warning lights on the vehicle.


How do you retrive engine codes on a 96 explorer?

1995 and later model vehicles need an OBDII scanner to retrieve the diagnostic codes. AutoZone and other parts stores usually will scan free of charge if the check engine light is on.


Reset the engine check light on Acura MDX?

Have vehicle scanned to determine problem and have codes cleared


How do you manually check 2003 Chevy Express van engine light code?

It takes a scanner to read the codes.


How do you reset the check engine light on acura 3.2 tl 2005?

Have vehicle scanned to determine the problem and/or have codes cleared


Where do you check the check engine light codes on a 1988 acura legend?

To check the check engine light codes on a 1988 Acura Legend, you need to locate the diagnostic connector under the dashboard near the driver's side. Use a jumper wire to connect the two terminals marked "TEN" and "GRD." Turn the ignition key to the "ON" position without starting the engine, and the check engine light will blink to indicate the trouble codes. Count the blinks to decipher the specific codes, which can then be referenced in a service manual for troubleshooting.


How do I diagnose a check engine light on 1997 Acura CL?

To diagnose a check engine light on a 1997 Acura CL, start by using an OBD-II scanner to retrieve any trouble codes stored in the vehicle's computer. These codes will help identify the specific issue triggering the light. After noting the codes, visually inspect relevant components such as the gas cap, vacuum hoses, and sensors for any obvious problems. Lastly, research the codes to determine the necessary repairs or further diagnostics needed.


92 olds cutlass supreme you just had new coil packs plugs wires and complete exhaust now the check engine soon light comes on about once a week but goes off Does light need to be on to check the codes?

The computer stores the codes until it is reset manually. The check engine light does not have to be on to check the codes.


How do you check engine light for a 94 Acura Integra?

To check a engine light you need some kind of scan tool and it will show you what kind of code or codes is set for the engine light to go off.


What causes Check engine light 2001 acura?

There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.


What does it mean if your VSA light is on in your Acura TSX?

What does it mean when your vsa light is on Acura txs