the radiator cap is on top of the radiator you idiots
Sometimes the gas cap is not close tight or when change grade of gas but it will go off.
To add antifreeze to a 2007 Suzuki Forenza, first ensure the engine is cool and locate the coolant reservoir, typically found near the front of the engine bay. Remove the cap from the reservoir and add a 50/50 mix of antifreeze and water, filling it to the "FULL" line. Replace the cap securely and start the engine, allowing it to run for a few minutes to circulate the coolant. Check the level again and add more if necessary.
On a 1998 Suzuki Marauder, the radiator cap is located on the top of the radiator itself. To access it, you may need to remove any surrounding components or fairings that might obstruct your view. Always ensure the engine is cool before attempting to remove the cap to avoid burns from hot coolant.
The radiator cap on a 1998 Suzuki Marauder 800 is located on the top of the radiator, which is situated at the front of the motorcycle. To access it, you may need to remove the seat or any surrounding components for better visibility. Always ensure the engine is cool before removing the cap to avoid injury from hot coolant.
The radiator cap in a Suzuki XL-7 is typically located on the top of the radiator itself. You can find it near the front of the engine bay, usually on the driver's side. To ensure safety, it's best to allow the engine to cool before removing the cap, as the system can be pressurized. Always consult your owner's manual for specific guidance related to your vehicle model.
On a 2007 Mercury Milan : The thread on cap on the engine coolant reservoir is the pressure cap / radiator cap
In the bottle that has the radiator cap on it.
On a Marauder VZ800 (1998), remove the black cap (triangle shap) on the right side at the front. There you can fill radiator fluid.
To add clutch fluid in a 2005 Suzuki Forenza, locate the clutch master cylinder, which is typically found on the driver's side near the firewall. The reservoir cap is usually labeled; remove it and add the appropriate type of fluid, usually DOT 3 or DOT 4 brake fluid, until it reaches the recommended level. Be sure to check for any leaks and replace the cap securely after topping off.
If you have a threaded cap on your coolant reservoir that is your " radiator cap "
No , the " radiator " cap / pressure cap is the thread on cap on the engine coolant reservoir
The radiator cap is on top of the radiator.