If that vehicle has all wheel drive all 4 tires need to be the same size.
The 2006 Toyota 4Runner in the 4WD Sport trim comes equipped with P265/65/17 tires. The largest approved size tires for this application are P295/35/24 which require aftermarket wheels.
When changing the brake rotors on a 1990 Toyota 4runner the vehicle must be safely raised and propped up. The calipers must be loosen and rotors will be able to be removed. The process must be repeated for all four wheels.
4 runner means four wheel drive. If the 4runner is only two wheel drive or the 4 wheel drive is not engaged, the rear wheels power the vehicle.
no different bolt spacing...
To change the rear shocks on a 1999 Toyota 4Runner the rear of the vehicle must be lifted with the wheels removed. Find the shock mounts and remove those nuts as well as the lower fork hardware. Each shock will slide out in whole assemblies.
To adjust the rear brakes on a 1988 Toyota 4Runner, start by lifting the vehicle and removing the rear wheels. Locate the adjuster wheel through the access hole on the backing plate, using a flathead screwdriver to turn it; turning it upward tightens the brakes, while turning it downward loosens them. Adjust until the brake shoes are just barely touching the drum, then replace the wheels and lower the vehicle. Finally, test the brakes by pressing the pedal to ensure proper function before driving.
Toyota cars- Mitsubishi wheels
No, it will not.
Unknown year - In front of the drivers side rear wheel. It's bolted to the frame. On my 1994 4runner it's bolted to the frame on the PASSENGER side about midway between the front and rear wheels. Toyota states you should never have to replace a fuel filter as they are designed for life; unless you know for a fact you have purchased bad gas. On my '96 Limited it's on the left frame rail underneath the car, almost directly beneath the driver's seat. Good idea to replace it every 100,000 miles or so. On my 1986 4runner EFI, it's bolted to the engine block underneath the fuel rail. I've had to replace it once before. But in any engine configuration find where the fuel enters your engine (either carburetor fuel supply, or the fuel rail on EFI) and trace the line back toward the source (gas tank) somewhere in that line will be the filter, and they can look very different from eachother, I know mine just looks like a big metal canister.
would you please show me how to replace the brake pads for my Toyota Camry 2002 sedan 4 cylander, alloy wheels with the antibrake.thank you. Please show me step by step with the pictures , thanks a lot. You can send to my email.: thanhniensg2000@yahoo.com
If they are both 6 lug they should fit, the toyota wheels are usually not as wide as the chevy wheels
If one is looking to purchase custom wheels for a Toyota Tundra the most variety can be found online. Sites such as Element Wheels, Wheel Fire or Wheels for Less may be options.