Suzuki Verona 2004 RADIO CODE RADIO PASSCODE COD----4316 2152 4513 4362 1156 2145 3451 6361 5624 5241 3346 1165 3241 4524 5436 5613 1341 2453 1651 5445 2253 3116 4353 1636 5324 1325 6156 4236 3644 2661 5632
You need to call the dealer with the radio srl# and they can give you the code
the code or the 2004 verona is 6361 just turn it on type it in and it will work.
To reset the radio code for a 2004 Suzuki Verona, you typically need to turn on the ignition and the radio. If the radio displays "CODE" or "LOCK," you'll need to enter the correct code, which is usually found in the owner's manual or on a card provided at the time of purchase. If you don’t have the code, you may need to contact a Suzuki dealership with your vehicle's VIN for assistance. After entering the correct code, the radio should function normally.
5241
To remove the radio from a 2004 Suzuki Verona, first disconnect the negative battery cable to ensure safety. Then, use a flathead screwdriver to carefully pry off the trim panel surrounding the radio. Once the panel is removed, unscrew the mounting screws securing the radio, pull it out gently, and disconnect the wiring harness and antenna from the back. Reinstall in reverse order if you're putting in a new radio.
I fought with my axle nut on 2004 suzuki Verona for hours, then finally checked and it called for 236 ft/lbs.
.044. Just did my plugs!
640 rpms
?
They told me that i needed to replace the ignition coil on my 2004 Suzuki Verona, my question is how do i know which to change because i just found out the are 6 of them. Do i have to replace them all?
Take it to a mechanic
they are in the converters in the exhaust syatem below the intake