of course you can. you can swap almost anything in the S-chassis.
KA24E, KA24DE, SR20DET, RB20DET, RB25DET, RB26DET, LS1, 2JZ, 1JZ, the possibilities are endless.
-ralphy BEATDOWN
Yes, as long as it's a KA24DE engine in both cars.
Yes. The ka24de motor is used from 95 through 98.not just used from 95 to 98 because i have a 1990 240sx with a ka24de in it
a 95 240sx engine is a 2.4 litre KA24DE inline four cylinder. it's a 16 valve DOHC.
no different door the 93 will fit small on the 95
the 95 has KA24DE engine; yours is the same. you should be able to use them near interchangeably.
Yes but the 95 bell housing will need to be reused to the crank angle sensor can be retained
Yes. Despite the small differences in engines they are interchangeable. Just make sure you use the 95 engine harness.
Can you swap a 93 Geo metro manual transmition with a 95 Geo Metro
Driver window is out of alignment on a 95 Nissan 240sx? what do i do
For a 1995 Nissan 240SX with the KA24DE engine, the distributor wiring typically comes from the engine harness and connects to the distributor itself. Check the main engine harness that runs along the front of the engine; the wiring for the distributor is usually a set of two or three wires. If you’re having trouble locating them, refer to a wiring diagram for the KA24DE engine, which can help you identify the specific colors and positions of the wires. Additionally, inspect for any damage or disconnections in the harness that could be affecting the signal to the distributor.
the 95 and the 93 full size pick ups are identical there should be no need to swap parts the 95 vortec from an S-10 will need the entire intake manifold, exhaust, sensors, and wiring harness from the 93 to make it run
Sure it will, they are the same motor.