pretty sure they are 6.5 inch
Can you please tell me where the location of the Crank Shaft Position Sensor is on a Nissan Pulsar N16 2000 model?
buy a different model Nissan sucks!!!!!
The indicator reset itself after 10-14 Days
The layout is on the cover panel of the fuse box. Otherwise, you'll have to buy a manual.
you should be able to find the number in the booklet that u have. its 4 digits
it varies from model to model, but from my time working for nissan, they were generally 32psi front 30psi rear
There are many 1.6L Nissan engines. To get the correct specifications engine model/code is the most accurate information required/alternatively type of car, for example Nissan Pulsar and month/year of manufacture.
When the dash lights dim on the Nissan Pulsar SS 99 with the use of the turn signal, it is usually an indication of a bulb burned out in the turn signals. It can also mean that the flasher is bad and taking too much juice.
For a 1996 Nissan Pulsar, the stereo wiring color code is typically as follows: the constant power wire is usually red, the ignition power wire is yellow, the ground wire is black, and the speaker wires generally include front left (+) white, front left (-) white with black stripe, front right (+) gray, front right (-) gray with black stripe, rear left (+) green, rear left (-) green with black stripe, rear right (+) purple, and rear right (-) purple with black stripe. Always verify with a wiring diagram specific to your model, as variations may exist.
Depending on what model, but usually under the bonnet on the front panel.
In the Nissan Pulsar, the power transistor is typically located in the engine bay, mounted on or near the ignition coil assembly. It is responsible for controlling the ignition system and ensuring proper spark timing. Refer to the vehicle's service manual for the exact location, as it may vary slightly depending on the specific model year and engine configuration.