answersLogoWhite

0

You have to have an engine rebuild which costs from $2500 to $4000 depending on other internals that needs replacing and labour of the shop.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Rx7 2nd gen power lose?

Your apex seals might be bad, your engine may need a rebuild!


What causes gas in oil on a 88 non-turbo rx7?

Bad Apex seal


Can a Mazda rx7 still run with a bad apex seal?

if you have a bad apex seal you can replace the apex seals and side seals depending upon the condition of the engine, if the housing or side wall is worn or scraped badly than you will need new housings and possibly side walls. but your motor may run depending on how badly worn the apex seal is.


How many quarts of oil for a Rx7?

It is 5.8 Liters for an FC Rx7.


What are symptoms of bad apex seals on a 1988 Mazda RX7?

you lose power and the engine dies... you lose power and the engine dies... Or you go no where very quickly! (for pictures of blown seals go to http://www.noveights.com/id93.html )


My rx7 floods itself and runs rough once its started?

I had the exact same problem. I own a 1984 Mazda RX-7 GSL-SE and what i did was bought a new starter. A new starter actually will start a flooded RX-7. But if you dont want a new starter then push the car and the car will start. now the rough start is related with the seals and oil. the oil is low or bad and/or you need new seals.


Your rx7 idles from 1500 to 2000 rpm and it wont go past 2000 why is that?

what type of oil can i use for my Mazda rx7


Are the turbos on a Mazda rx7 water cooled?

No. Oil cooled.


What is the best oil for a 1988 Mazda rx7?

royal purple


What weight oil for RX7 Mazda?

20-50w non synthetic


What do you do if your Mazda rx7 has no rear rotor compression?

rebuild or replace.....you have a serious issue there


Your 1990 Mazda rx7 bogs out when tryin to go what could be the problem be?

ha ha! you need apex seals. Very common with rotary's.