I have 1999 lanos and it is a distributor-less model.
Turn off the defroster.
If the lights on a 1999 Daewoo Lanos are flashing, the engine is misfiring. It is likely the spark plugs need to be replaced and can be evaluated by a mechanic to resolve this issue.
To reset the airbag light on a 2000 Daewoo Lanos, first, ensure that the vehicle is turned off. Disconnect the negative battery terminal and wait for about 10 minutes to allow the system to reset. Reconnect the battery, then turn the ignition on without starting the engine. If the airbag light remains on, it may indicate a persistent issue that requires diagnostic troubleshooting.
I have A 99 daewoo Lanos with the same problem. I took apart my dash to find that the control cable has a broken shield over it. to easly check this your self just above the gas peddle and to the right there is your heater box on the side ov it is a control lever for diferant settings see if you can move it. I have A 99 daewoo Lanos with the same problem. I took apart my dash to find that the control cable has a broken shield over it. to easly check this your self just above the gas peddle and to the right there is your heater box on the side ov it is a control lever for diferant settings see if you can move it.
If your 2000 Lincoln has turn signals that don't work, first check to see if the bulbs are working. Then, see if there is fuse that has blown that affects the turn signals.
theyre orange
If the turn signals in the dash don't work, what about the outside front and rear turn signals? Working? Not working? If it's not working, replace the turn signal relay under the dash.
It is located in front of the instrument cluster if it's 98- There's an access panel on the side of the dash and driver door, The relay is green on a violet connector block.
The head bolt torque specs on a daewoo lanos with the 1.6 liter engine arestep 1 18ft lbs step 2 turn all bolts 70 degrees step 3 turn all bolts additional 70 degrees and step 4 turn all bolts 30 degrees that is what came straight from the torque manual
The flasher is a type of switch that regulates the turning on and off of your vehicle's turn signals and hazard signals.
To adjust the idle speed of a Daewoo Lanos 1.2, locate the idle speed adjustment screw on the throttle body. Start the engine and let it warm up to operating temperature. Use a screwdriver to turn the screw clockwise to increase the idle speed or counterclockwise to decrease it, while monitoring the RPMs with a tachometer. Ensure the idle speed is set according to the manufacturer’s specifications, typically around 800-900 RPM.