Proffesionals use a special type of suction cups, but a hammer works too.
depending on year. it could be a number of things. check relays, fuses and motor.
what makes a 1991 Nissan 240sx stop while you drive. and it is not out of gas or oil. Could it be the ignition module
it could be your timing is off
yes it will and its about the best thing you could do to a 240Sx.
you could only get 24SX in NFS carbon collector's edition
A 1995 Nissan 240SX is unlikely to fit inside a 1993 Nissan Hardbody pickup due to the size and shape differences between the two vehicles. The 240SX is a sports coupe, while the Hardbody is a compact pickup truck with a cargo bed. Even if you could theoretically fit the 240SX into the bed, it would require significant modifications and likely damage both vehicles. Overall, transporting one vehicle inside another is impractical and not recommended.
this could be a blown fuse, defective flasher, loose connection, or burned out bulb tk
The 1993 Nissan 240SX does not come with a factory-installed speed governor. However, if your vehicle is experiencing speed limitations, it may be due to other factors such as the ECU or modifications. To remove any speed restrictions, you could consider reprogramming the ECU or installing a performance chip, but it's essential to ensure that any modifications comply with local laws and regulations. Always consult with a professional mechanic or tuner for the best approach.
If your Nissan 240sx won't go into reverse, it could be due to several issues. Common causes include a low transmission fluid level, a worn-out clutch, or a problem with the transmission linkage. Additionally, if the transmission itself is damaged or there are internal mechanical issues, this could prevent it from engaging reverse. It's advisable to have a mechanic diagnose the problem to determine the exact cause.
Yes, with money everything is possible. The VG30DETT (top of the line engine in 300zx) has been put in several different Nissan car; and could be done in others.Easy ones: S13 (89-94 240sx), S14 (95-98 240sx), R32-34 (skyline gtst, gtr)Medium: Z33 (350z, G35)Hard: Nissan Micra, Pulsar, SentraAnything originally RWD will be easy, FWD HARD
Valve lifter could be sticking. Take the valve cover off and start the engine. You can narrow down which one it is. Might Not be sticking and just need adjusting.
From the inside, cut out the rubber windshield rubber with a box knife. Take care not to cut too deep, as you could snag on the headliner. Gently tap the windshield at each corner to free it, then remove. Best to have a friend handy, but easily done by yourself.