It took me about 1.5 hours to do. I have a 92 pathfinder 4 x 4. I first took a little coolant out of the radiator so I could remove the upper radiator hose. With the hose removed I took out the fan shroud. After that you will remove four bolts that hold the fan clutch to the water pump. Remove the fan off of the fan clutch and put on the new fan clutch. Put everything back together in reverse order.
Nope. If you do you should email the company about it
On
To replace the fan clutch on a 1986 Nissan 300ZX, first, ensure the engine is cool and disconnect the battery. Remove the fan shroud and the fan by unscrewing the bolts securing the fan to the clutch. Then, unbolt the fan clutch from the water pump, install the new clutch, and reattach the fan and shroud. Finally, reconnect the battery and check for proper operation.
fan clutch is built into water pump,u have to get new water pump.
How do you change a fan clutch on a 1991 bmw528i?
with your dick
Maybe try replacing the fan clutch first.
connected to your water pump.
Visit www.trailvoy.com for a complete answer to the fan clutch change with pictures.
the fan clutch is built into the water pump,it cant be separated,you have to replace the water pump.
Yes it takes a 36mm wrench and a holder for the pulley to remove the fan clutch,
no