You can go to autozone and have the OBDII scanned for free. They can give you the code(s) that are bad and attempt to tell you which sensor is bad but they may not know. Just check the codes online or go to your local library and pick up a mitchell book and research it
How do you turn off the check engine light on a 2001 honda accord?
The check engine light on a 2003 Honda Accord will be triggered when something on the engine is malfunctioning. To rid the check engine a light the ECU will need to be reset.
that is not a question
That would be the check engine light.
There is a problem with the emissions system. Have the ECU scanned with a OBD2 scan tool. This will tell you the fault code that has been set. With this code you can start to diagnose the problem.
You can reset the 2004 Honda Accord check engine light by removing the instrument light fuse. The location of the fuse can be found on the inside cover of the fuse box.
A 2000 Honda Accord check engine light will stay on if the ECU is not reset. To reset the light remove the ECU fuse from the engine bay fuse box. Reinsert it after 5 seconds.
There is one, but it's not marked "check engine." It looks like a little engine with a lightning bolt on it.
The check engine light may be flashing on a 1996 Honda Accord if a timing issue is detected or oil pressure is low. The exact cause can be determined by connecting an OBDII code reader.
You will need to access a diagnostic computer to turn off the check engine light on the 2003 Honda Accord. You could also remove the fuse from the dash lights or instrument panel.
engine gaskets and seals don't last forever. to properly diagnose what is leaking, have an auto shop check your car out. they can visually check your car out, and, if necessary, put a dye into the engine to find the leak.
Click the link for directions and a diagram.