To replace the dashboard lights on a 2000 Toyota Sienna, first, disconnect the negative battery terminal for safety. Remove the dashboard panel by unscrewing any visible screws and gently prying it off to access the instrument cluster. Once exposed, locate the burnt-out bulbs, twist them counterclockwise to remove, and replace them with new bulbs. Reassemble the dashboard and reconnect the battery to test the new lights.
The "trip odometer" on the dashboard doubles as a dimmer. So, the solution to no lights inside the Toyota Sienna is to turn the trip odometer up to turn the lights back on.
Turn the stem for the odometer reset
If you know where to change the odometer/tripmeter display... Instead of pushing that control, turn it counter-/clockwise to dim/brighten the dash lights.
I've researched this on the Internet and apparently the trip odometer button also serves as the dimmer for the dashboard lights. If you turn it (anti)-clockwise, your dash lights should come on. Its mentioned obscurely in the manual.
Can you please restate your question because I have no idea what is your problem.
Hi we've had several lights out for a while but the guy at the dealer said that they'd have to rip the whole dashboard out just to replace two little inexpensive l.e.d. lights and the labor would be VERY expensive. So, we suffer with the inconvenience until something else goes wrong and the dashboard HAS to come off. This may not help but I'm sure if you check the dealer they can give you an estimate of time/labor vs part cost. hd- 6/21/09- I changed my instrument bulbs on my 200 Sienna and it was easy. Only 3 screws. Please see my notes at: How do you disassemble the dashboard of a 2000 Toyota Sienna
toyota hiace dashboard warning lights code meanings
i dont know exactly.
To change the dashboard lights in a Toyota MR2, first, disconnect the car battery to ensure safety. Then, remove the dashboard cover by unscrewing the necessary screws and gently prying it off. Locate the bulb sockets on the back of the instrument cluster, twist them counterclockwise to remove, and replace the old bulbs with new ones. Finally, reassemble the dashboard and reconnect the battery to test the new lights.
In a 1999 Toyota Sienna CE, the fuse for the dash lights is located in the fuse box inside the vehicle. Specifically, you can find it under the dashboard on the driver's side. Look for the "Instrument" or "Dash" fuse in the fuse box diagram, which is typically on the cover or in the owner's manual. If the dash lights are not working, checking this fuse for continuity or replacing it may resolve the issue.
The trip odometer switch on the odometer itself is the dimmer on Toyota Sienna. If you turn this switch all the way to the left your panel would become dark. Simply turn the switch to the right and all panel lights would come on. I had a similar problem and the manual bailed me out.
You turn the trip odometer button on the dash.