Generally the housing is 2 parts & back should unscrew from front. Then just get a universal lighter & plug in the hot wire on back. They sell at many auto parts stores.
just take the old one out, any car lighter will work
The 2004 Ford Ranger cigarette lighter fuse can be found in the fuse box. The cigarette lighter fuse will be in the second column, fifth from the bottom.
Where is the fuse for the cigarette lighter on a 2004 chevrolet malibu classic?
Where is the cigarette lighter fuse on a 2004 s 500 mercedes
To replace the fuse for the cigarette lighter on a 2004 Pontiac Montana, first locate the fuse box, which is typically found under the dashboard on the driver's side. Use the fuse diagram on the cover or in the owner's manual to identify the specific fuse for the cigarette lighter, usually designated as "CIG" or similar. Remove the blown fuse using a fuse puller or pliers, then insert a new fuse of the same amperage. Finally, test the cigarette lighter to ensure it is functioning properly.
How do I fix my cigarette lighter when fuse is good
# 14 is a 20 amp fuse for the cigarette lighter
It is important to consider that any metal coins dropped close to the cigarettes or inside of the cigarette lighter can defuse it. First consideration is to change fuse located left of steering wheel.
# 29 is a 20 amp fuse for the cigarette lighter
What size is fuse for cigarette lighter on Buick Ladner 2001
To remove the front cigarette lighter from a 2004 BMW X5, first, use a flathead screwdriver to carefully pry out the lighter socket from the dashboard. Disconnect the electrical connector attached to the back of the lighter socket. If necessary, you may need to remove surrounding trim or panels for better access. Once disconnected, you can replace or repair the lighter as needed.
To replace the cigarette lighter in a 2004 Chevy Cavalier, first, disconnect the negative battery terminal to ensure safety. Remove the trim panel surrounding the lighter by gently prying it off with a flat tool. Disconnect the wiring harness from the back of the lighter and remove it from the socket. Install the new lighter by reversing the steps: connect the wiring harness, insert it into the socket, and reattach the trim panel. Finally, reconnect the battery terminal.