0
Make sure parking break is off. There are two small screw holes in the drum. Go to an auto parts store and get a selection (two each size) of metric bolts that are close to that size. Find the ones that fit and hand start one in each hole. Bolts should screw in easily. screw in bolts until tight with a wrench and tap lightly on the the drum on the outside edges going all the way around. You may need to do this retighten and tap again around the drum. This should loosen the drum from the rear axle plate.
What else can I help you with?
Do the Toyota Sienna 2008 have disc or drum brakes?
Discs in the front and drums in the back.
How do you remove rear brake drum from a 1993 Toyota pickup?
How do you remove rear brake drum from a 1993 Toyota pickup?
How do you remove a rear drum brake on a Toyota Tacoma 2001 truck?
To remove the drum, beat it mercilessly with a very large hammer.
How do you remove drum on 1999 Toyota 4Runner?
To remove the rear drum on a 1999 Toyota 4Runner, first, ensure the vehicle is safely lifted and secured on jack stands. Remove the wheel, then locate and remove the two retaining screws holding the drum in place. If the drum is stuck, tap it gently with a hammer to loosen it, and then pull it straight off. Make sure to disconnect any brake components if necessary to facilitate removal.
How do you remove the drum brake from a 2001 Toyota Echo?
To remove the drum brake from a 2001 Toyota Echo, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the wheel, then locate and remove the drum brake's retaining screws, if present. Gently pull the drum off the wheel hub; if it's stuck, tap it lightly with a hammer to loosen it. Finally, disconnect any springs or hardware that may be attached to the drum before fully removing it.
How do you take drum brakes off a Toyota tundra?
To remove drum brakes from a Toyota Tundra, first ensure the vehicle is on a flat surface and secure it with wheel chocks. Loosen the lug nuts and lift the vehicle with a jack, then remove the wheels. Remove the drum by locating and removing the retaining screws or clips, then gently tap the drum if it's stuck due to rust or debris. Finally, slide the drum off the wheel hub to access the brake components.
How do you remove rear brake drums from a 2002 Toyota Sienna?
1. For your own safety, put stoppers on the other 3 wheels. DO NOT put the foot (hand) brake on or you will have difficulty in removing the brake drum. 2. jack and remove the wheel. 3. pull the drum off and rock and tap slightly if there are rusts or debris that preventing the drum pull out, no hammer is necessary! There are two 8x1.25mm threaded bolt holes in each drum that you can run bolts through and it will push off the drum. Just changed my rear brake shoes last weekend and this worked perfectly to get the rusty drums loose.
How do you adjust parking brake on 2004 Toyota sienna?
if your van has rear drum brakes, adjust them up until there is a slight drag on the brakes. this usually does the trick to tighten up the parking brake.
Remove rear drum on a 1999 Toyota?
You need to use a heavy hammer, but be careful not crack the drum itself. Just make sure that you work it your from two opposite sides, for instance, up and bottom.
How do you remove the brake drums on a 1999 Toyota Camry?
You have to loose nuts and lift your car up. Then remove a wheel. There are two ways to remove brake drums. First using a hammer. Knocking the drum with a hammer in the direction opposite from the car. And second more efficient is to find two screws which fit threades in removing drum holes (two holes in a drum with a thread in it).
How do you remove the brake drums on a 2004 Toyota Camry?
To remove the brake drums on a 2004 Toyota Camry, first ensure the vehicle is securely lifted and supported on jack stands. Remove the wheel lug nuts and take off the wheel. Locate the brake drum's retaining screws (if present) and remove them, then gently tap the drum with a hammer if it's stuck. After that, pull the drum straight off the wheel hub; if it's still resistant, you may need to adjust the brake shoes inward using the adjuster wheel to create more clearance.
How do you remove rear brake drums on 85 Toyota hilux?
there are 2 holes in the drum that are threaded. find a couple bolts that thread into them. while tightening them occasionally tap on the drum lightly to pop it loose. keep threading the bolts in until the drum falls off.
