pull off mud flaps and find the belt tensioner turn the nut on the tensioner pulley clockwise to loosen serpentine belt. Take belt off. Take the three bolts out of the water pump pulley and take it of then you have three bolts connecting the water pump to the motor take them off problem may be the old water pump may stick if it does not slide it out replace it and dont forget to clean the gasket area with a wire brush and use sealant along with a gasket I hope this is helpful
No
replace water pump 2005 chevy trailblazer vortec 4200
u
how do you get a water pump off on a 2005 trailblaxer 4.2
The water pump from Mazda 626 is the same, all part from Mazda 626 work very good in the Kia Credos and Clarus.
Could you tell me how would you replace the oil pump on a Mazda Protege?
In order to remove the water pump on a 2000 Mazda Millennia, you must first remove the timing belt and the pulley for the water pump. Remove the pump itself by detaching the four bolts that are securing it. Next, replace any gaskets, install the new pump, then the pulley, and then the timing belt.
About $500.00
how can ford freestar 2004 water pump be replaced
how to change water pump on a 2005 colorado truck 2.8 eingine
The water pump is located behind the timing belt cover and is driven by the timing belt. You need to reove it to gain access to the water pump.
powersteering belt off first, then water pump, each has its own ten.