Through the starter hole passenger side bottom
If it bolts up it is installed correctly.
support the door then remove the hinge to door bolts and lift door off.
Where can I locate the fuel filter on a 1997 Nissan Pathfinder?
You can adjust the camshaft on your 1997 Mazda 626 with the camshaft adjustment bolts. You can access the camshaft adjustment bolts by removing the cylinder heads.
The NASA space probe Pathfinder landed on Mars in July 1997.
The body of the 1993 Pathfinder is very different from the 1997 Pathfinder (assuming you're talking about a US Spec Pathfinder). So I'm afraid the answer is no.
Disconnect negative battery cable. Raise vehicle on a lift or use a floor jack and put on jack stands as needed to keep vehicle from falling on you. Mark the driveline's rear U joint assembly and the yoke to keep it balanced when installing driveline back. You'll have to pull the transmission next. Some models have an inspection plate that you can take off to reach the converter's bolts. If so, you'll need something to turn the flexplate to take off all of the bolts. After the bolts are out, pull the transmission and converter as one unit. If no inspection plate, pull the transmission, you will then have access to the torque converter which is bolted to the flexplate/flywheel. Installation is reversed.
It is located between the engine and the transmission. Removal of either would be required to gain access to it.
In a 1997 Nissan Pathfinder, the fuse box is typically located under the dashboard on the driver's side. You may need to remove a cover panel to access it. Additionally, there is a second fuse box located in the engine compartment, near the battery. Always consult the owner's manual for specific details and fuse layout.
get a mecanic to do the job
NASA's Pathfinder landed on Mars on July 4, 1997.
"How much is the cost of the Catalytic converter on a 1997 Nissan truck?"