To adjust the throttle position sensor (TPS) on a 2000 Infiniti G20, first, ensure the ignition is off and disconnect the TPS connector. Then, use a multimeter to measure the voltage output while slowly opening the throttle plate. The voltage should typically be around 0.5 to 0.6 volts at closed throttle and should smoothly increase as you open the throttle. If necessary, adjust the TPS by loosening the mounting screws and repositioning it until the correct voltage readings are achieved, then recheck and tighten the screws.
R&R tps sensor
NO ajust on tps sensor,. Replace
you dont, you replace it
The tps (throttle position sensor) is not adjustable.
It is not adjustable.
To adjust the throttle position sensor (TPS) on a 1997 Nissan Hardbody, first, locate the TPS on the throttle body. Use a multimeter to measure the voltage output by connecting it to the middle terminal of the TPS and grounding it. With the ignition on (engine off), the voltage should be around 0.5 to 0.6 volts at closed throttle. If it's not, loosen the TPS mounting screws and adjust the sensor until you reach the correct voltage, then tighten the screws securely.
your tps or throttle position sensor
The throttle position sensor is not adjustable.
It is not adjustable.
The throttle position sensor is not adjustable.
You don't adjust it. You buy a new one and replace it.
on the side of the throttle body