The clutch master cylinder has an actuator rod that connects to the clutch pedal.This rod has a lock nut on it.Loosen this nut and turn the rod to lengthen or shorten the pedal free play. .
Boman
the rule of thumb is to have at least 1 inch of freeplay in the clutch pedal to prevent the clutch disc from dragging
Clutch travel
The clutch fluid reservoir in a 2001 Toyota Tacoma is located on the vehicle's firewall near the back of the engine compartment. It provides a constant supply of fluid to the clutch as needed.
You can not adjust it. Its Hydraulic.
You can only adjust the clutch pedal. You can adjust position and range just on top of the pedal.
Using the clutch start cancel button on a Toyota Tacoma will damage the truck. Damage can occur to the starter and eventually the engine.
Between the brake reservoir and the firewall.
tercel
figured it out. thanks anyways.
when it slips or grinds
I don'y know
i used to have one of these however I upgraded but before doing so I did have to replace the clutch as my lil bro wore mine out I tried a clutch from a rotary Honda that didnt even fit in however I got in touch with Toyota and they sent me a clutch from a 1998 Toyota tacoma 4x4 it worked until it broke and I needed a new one
yes but you have to push in your clutch start cancel button