How do you bleed the brakes on a 2002 Nissan Quest?

Answer 1

Hello,

Bleeding the brakes on a '02 Quest is quite easy. Here is a quick walk-through on the job:

1. Turn ignition switch OFF and disconnect ABS actuator and control unit connector or negative battery terminal.

2. Connect a transparent vinyl tube and container to air bleeder valve.

3. Fully depress brake pedal several times.

4. With brake pedal depressed, open air bleeder valve to release air.

5. Close air bleeder valve.

6. Release brake pedal slowly.

7. Tighten air bleeder valve to: 71 inch lbs. (8 Nm).

8. Repeat steps 2 through 7 until no more air bubbles come out of air bleeder valve.

9. Bleed the brake hydraulic system air bleeder valves in the following order:

§ Right rear brake

§ Left front brake

§ Left rear brake

§ Right front brake