You will need to remove the rear seatbelt bolts and pretty much all the back paneling (screws towards floor and some clips behind handles. Once you do that you can remove the speakers (6x9 with about 4inches of depth)
6X9
The fuel injectors on a 2001 Mitsubishi Montero Sport are located on the top, back side of the engine. They connect directly to the cylinder and provide fuel for combustion.
The size of the speakers for the front door in a 2002 Mitsubishi Diamante is 6 x 3/4 inches. The back speakers are 6x9 inches.
both front and back are 6 1/2" speakers
Just take out the speakers from the speaker box and make a new box for the speakers if they dont fit.
how to change a back motor mount on a 2002 Mitsubishi mirage decoupe
leopen hood of vehicle. The headlamp is in a case that comes out. Headlamp screws in and out of it. Replace, and then put case back in. - Or stop at Auto Store, play dumb and have them do it for you (that's how I found out! )
under the back seat.. lift up seat and move the carpet it should be in the middle
To change the front rotors on a 1998 Mitsubishi Montero Sport, first, lift the vehicle and remove the front wheels. Next, remove the caliper by unbolting it and carefully hanging it aside to avoid stress on the brake line. Then, remove the caliper bracket, if necessary, and slide the old rotor off the hub. Finally, install the new rotor, reattach the caliper and bracket, and ensure everything is tightened properly before putting the wheels back on and lowering the vehicle.
The 1992, 1993, 1994, 1995, 1996 & 1997 Mitsubishi Montero LS takes a 14" replacement rear wiper blade. Note however, when buying wipers be sure to always lookup your vehicle make, model and year in the application guide book at the store
There are 2 tweeters in the dash, a 6 1/2 in each door and 6x9s in the back
To fill the back window washer on a 2001 Mitsubishi Montero, open the rear hatch and locate the washer fluid reservoir, which is typically near the rear of the vehicle. Remove the cap from the reservoir and pour in the appropriate windshield washer fluid until it's full. Replace the cap securely after filling. Make sure to check the fluid level periodically to ensure proper operation.