It is the mileage that is actually on the car. If the odometer is replaced, the correct reading is written down. Add that to the reading of the replacment odometer and you have the actual mileage on the car.
On a 1999 Polaris Sportsman 500 ATV, the oil dipstick is located on the right side of the engine, near the rear. It is typically found on the crankcase and has a cap that can be unscrewed for checking the oil level. Look for a yellow or black handle for easy identification. Always ensure the ATV is on a level surface when checking the oil to get an accurate reading.
A tachometer that shows the wrong reading and get stuck sometimes could be caused by faulty wiring between the transmission and tachometer. It could be caused by a defective instrument cluster.
It is against the law to change an odometer meter please
It is the odometer in kilometers, the first is in miles.
The exact mileage per year is the odometer reading at the end of the year minus the odometer reading at the beginning of the year. If you don't have the odometer reading from the beginning of the year, the next best thing is to subtract an older odometer reading from the reading at the beginning of the year, then divide the difference by the number of years between readings. Without any odometer readings from the past, the best you can do is to calculate the average annual mileage over the life of the truck, which is the current odometer reading divided by the truck's years of service.
The odometer reading for insurance purposes is the mileage recorded on a vehicle's odometer at a specific point in time, used by insurance companies to assess risk and determine premiums.
By driving the vehicle
No, you cannot reset the odometer reading on a Nissan Pathfinder, as it is illegal to tamper with odometers in most places. The odometer is designed to accurately reflect the total distance the vehicle has traveled. If you're encountering issues with your odometer, it's best to consult a professional mechanic for advice or repairs.
This question is not answerable.
There isn't a separate computer for just the odometer. Attached to the firewall behind the coolant bottle is the main computer. There are 3 cables that plug into the front of the computer and the odometer is in there. When you buy a new or refurbished computer for your jeep you need the vin number and the odometer reading so the computer can be programmed for your jeep. Meaning the odometer reading is in the main computer
With odometer reading selected (not trip A or B) turn key to LOCK and remove key (not sure if this is necessary) insert key, hold down odometer button while you turn key to ON position. Continue to hold down odometer button. Odometer display will show ------ then blank, your Maintenance Required light will turn off and your old odometer reading will return.