if this is the one on the bumper, you can access it from the bottom of the bumper. turn it as if you are loosening it. it should come out. if this is the one inside the cluster panel, remove the cluster and see which bulb it is. you should find this bulb at a parts store or a Toyota dealership.
how do you change the starter in a 2003 Toyota corolla
Put a flat head screwdriver behind the indicator cluster and prize it out. Then just twist out the bulb.
Toyota Yaris wing indicator/repeater is seal unit (it can't be opened), you have to replace the whole thing.
Change it at 90,000 miles.
To reset the oil change indicator on a 2014 Toyota Camry, start by turning the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then start the engine to ensure the oil change light has been reset. If it doesn't reset, repeat the process.
To change an indicator light on a Toyota Yaris, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the light assembly where the indicator is housed. Depending on the model year, you may need to twist the bulb socket counterclockwise to remove it, then pull out the old bulb and replace it with a new one. Finally, reinsert the socket, test the light, and close the hood.
Does this pry off from the outside? I don't know
Toyota published a "Convertible Repair Manual Supplement" which covers top replacement. The manual is available from Toyota dealers and is publication number 00400-RM042-S.
The signal light switch, on your Toyota Camry, can be changed by unplugging the signal relay switch. Plug in the new relay switch.
To change the gear shift light indicator in a 2003 Toyota Tundra, you'll need to access the gear shift assembly. Start by removing the console cover around the gear shifter, which typically involves unscrewing a few screws and carefully prying it off. Once exposed, locate the bulb or LED for the gear shift indicator, disconnect it, and replace it with a new one. Reassemble the console by reversing the disassembly steps.
It is detailed in your owner's manual. See sources and related links below for information on replacement lamps.
Buy a replacement set, then remove & replace one at a time to avoid messing up the order.