After you remove the plastic engine cover. You will see the front 3 plugs across the front of the engine with coilpacks on top of them. You will see 3 plug wires that go from those 3 coilpacks around the passenger side of the engine to the back side where the other 3 plugs are located. To get to those 3 plugs you will need to remove the intake plenum. This part is tricky, and will require a new gasket. Don't forget where all the wires and hoses came from. Good luck
how do i change the spark plugs on a 2006 hyundai accent
where are the spark plugs for a Hyundai sonata that the year is 1999
how to change spark plugs on a 2004 Hyundai sonata 6 cylinder
how many spark plugs in the v6 2.7l 2003 Hyundai sonata?
http://en.allexperts.com/q/Hyundai-Repair-815/change-spark-plugs-XG300-1.htm
To change the spark plugs on a 2009 Hyundai Santa Fe with a V6 3.3 engine, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the engine cover (if applicable) and then carefully detach the ignition coil connectors and bolts to access the spark plugs. Use a spark plug socket and ratchet to unscrew the old spark plugs, then install the new plugs, ensuring they are properly gapped as specified in the owner's manual. Reassemble by reconnecting the ignition coils and battery terminal, and start the engine to check for proper operation.
spark plug socket extention and rachet pull boots off plugs and have at it
how do you change the spark plugs in a trajet hyundi i have change the front one but the back one nearest the fire wall i dont no how to get to thanks for your help
Well it is easy to get to the front spark plugs but you are going to have to take off the intake manifold to get to the rear ones. Not an easy job. Probably have to pay big bucks at a garage to do this unless you can do it yourself.
In a 2005 Hyundai Santa Fe, the spark plugs are located on the engine cylinder head. For the 2.7L V6 engine, they are positioned on either side of the engine, beneath the ignition coils. To access them, you'll need to remove the engine cover and the ignition coils first. If you have the 3.5L V6 engine, the spark plugs are similarly situated but may require additional steps for access.
Disconnect the battery, remove the engine cover, remove the spark plugs wires and boots, and remove the spark plugs. Put in the new spark plugs, replace the spark plug wires and boots, replace the engine cover, and connect the battery.
when do you change spark plugs