0
Tools needed: New Spark Plugs Spark Plug Wrench Socket wrench Extension (At least 2-3 inch) size 10 socket size 12 socket First thing you need to do is find out where the spark plug cover is. Once you figure that out there will probably be size 10 or/and 12 bolts honding it down. Take that off and there you will see sensors connecting to each other and holding the spark plug in the cylinders. Unplug all the sensors and pull out the circular plugs holding the spark plugs down. THey might be a little tight and hard to get out so you're going to need to give it a good tug. once you pull them out MAKE SURE YOU DONT DROP ANYTHING INTO THE CYLINDERS. You can look down into them and see the spark plugs. Get your spark plug wrench, extension, and socket wrench and stick them down in and push so that the spark plug wrench grabs them. Just simply unscrew the plugs, pull them all out, and then put the next ones in, and tighten them down. Just connect all the sensors, and put the cover back on and you're done. Pretty simple. Tools needed: New Spark Plugs Spark Plug Wrench Socket wrench Extension (At least 2-3 inch) size 10 socket size 12 socket First thing you need to do is find out where the spark plug cover is. Once you figure that out there will probably be size 10 or/and 12 bolts honding it down. Take that off and there you will see sensors connecting to each other and holding the spark plug in the cylinders. Unplug all the sensors and pull out the circular plugs holding the spark plugs down. THey might be a little tight and hard to get out so you're going to need to give it a good tug. once you pull them out MAKE SURE YOU DONT DROP ANYTHING INTO THE CYLINDERS. You can look down into them and see the spark plugs. Get your spark plug wrench, extension, and socket wrench and stick them down in and push so that the spark plug wrench grabs them. Just simply unscrew the plugs, pull them all out, and then put the next ones in, and tighten them down. Just connect all the sensors, and put the cover back on and you're done. Pretty simple.
What else can I help you with?
How do you change the spark plugs in 2001 Lexus rx300?
How do you change the spark plugs in 2001 lexus rx300?
How many spark plugs in a 2001 Lexus IS300?
The 2001 Lexus IS300 uses a 2JZ-GE inline-6 Toyota engine, and has 6 spark plugs.
How do you change spark plugs on 2001 ford expedition?
how to change spark plugs on a 2001 expedition
How do you change spark plugs on a 2001 Lexus GS300?
To change the spark plugs on a 2001 Lexus GS300, first ensure the engine is cool and disconnect the negative battery terminal. Remove the engine cover and spark plug wire harness to access the spark plugs. Use a socket wrench to carefully unscrew and remove the old spark plugs, then install the new ones, ensuring they are properly gapped. Finally, reconnect the spark plug wires and battery terminal, and replace the engine cover.
How to replace the spark plugs on a 2001 Lexus LS430?
I want to know
How do you change the spark plugs in a 2001 Infinity I30?
How do you change the spark plugs (or tune up) in a 2001 Infinity I30
Where is the trunk lock actuator or motor for a 2001 Lexus LS430?
next to the spark plugs
How do you change plugs on 2001 suzuki vitara?
How do you change spark plugs on a 2001 suzuki vitata xl7
How do you replace spark plug from 2001 Lexus is 300?
http://my.is/forums/f67/is300-changing-spark-plugs-340989/
How do you change the spark plugs on a 2001 Oldsmobile Intrigue with a 3.5 engine?
how do change the spark plugs and the coil pack on a 2000 Oldsmobile intrigue
Change spark plugs 2001 Acura TL?
You can remove the 2001 Acura spark plugs with a 5/8 deep well socket. Turn the socket to the left to remove the spark plugs. Reverse the process to install the new spark plugs.
How do you change the spark plugs in 2001 Lincoln Ls?
what engine?
