0
Open the hatch, there are 2 screws holding the entire light assembly on each side of the vehicle. Take the screws out and lift the assembly away from the car outwards, there is a post on the front end holding it onto the side of the car. Then just twist the brake light socket to the left and pull it out to get to the bulb.
What else can I help you with?
Change center brake light on Hyundai?
what do you have to do to change the center brake light
How do you replace third brake light in 2009 Hyundai sonata?
How to change third brake light in 2009 Hyundai sonata
How do you replace rear window brake light bulb on 2004 Hyundai Santa f e?
How do you replace rear window brake light bulb in the 2004 Hyundai Santa Fe?Read more: How_do_you_replace_rear_window_brake_light_bulb_on_2004_Hyundai_Santa_f_e
Replace brake light Hyundai Santa Fe?
The brake light on a Hyundai Santa Fe is replaced by removing the retaining screws, twisting the bulb, and unscrewing it from the wiring harness. A new bulb is then installed and the assembly put back in place.
Where is the brake light fuse on the 2007 Hyundai Santa Fe?
The brake light fuse is in the fuse panel below the dash on the left side of steering column.
How do you change rear brake light 2007 Hyundai Santa Fe?
To change the rear brake light on a 2007 Hyundai Santa Fe, first, open the rear hatch and locate the access panel on the interior side of the tail light assembly. Remove the panel by unscrewing the fasteners or pulling it off gently. Next, disconnect the electrical connector from the tail light assembly, then twist and remove the old bulb from its socket. Insert the new bulb, reconnect the electrical connector, and reattach the access panel to complete the process.
Rear brake lights stay on Hyundai Santa Fe?
Ddefective or mis- adjusted brake light switch - located at the upper end of the brake pedal under dash area
How to change rear brake light 2007 Hyundai Santa-Fe?
2007 Hyundai Santa-Fe brake light bulb lamp replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
What fuse do you change on a 2008 Hyundai elantra if the rear brake lights and third rear brake lights do not work?
it would be the brake light switch about 20 dollars at autozone
How do you replace the brake light switch on a 2008 Hyundai Santa Fe?
To replace the brake light switch on a 2008 Hyundai Santa Fe, first, disconnect the vehicle's battery to ensure safety. Locate the brake light switch, which is typically mounted near the brake pedal arm. Remove the electrical connector and the retaining clip, then pull the old switch out and install the new one in the same position. Finally, reconnect the electrical connector, reattach any clips, and reconnect the battery to test the new switch.
How to remove the rear tail light on the Hyundai elentra 2002 to change the brake light - is it possible to change the brake light only as the side indicator light is working?
Remove the 3 nuts from behind the light housing in the trunk. Gently work housing free. You only need to change the bulbs that are dead.
How do you replace the fog light in the 2005 Hyundai Santa Fe?
=
