0
First, remove the wheel. Then, loosen the bottom bolt that holds the caliper in place. Swing the caliper up! Next, remove the brake pads by pulling them from the disc. Then, use a caliper tool to reset it. Next, spread the break pad lubricant on the brake pad and the caliper; this will lessen/eliminate noise when the brakes are applied. Lower the caliper onto the new brake pads - the most difficult part in my opinion - and secure the bolt. YOU ARE DONE! It's a good idea to secure your new brake pads by making short stops and pushing the brake pedal down as far as it will go. You've just saved yourself at least $100 bucks!
This answer is leaving a few details out. There are some retaining pins that have a spring attachment. You need to remove them before you can take off the pads and reinstall them when you put the new pads on.
What else can I help you with?
How do you replace brakes and rotors on 2001 Toyota 4Runner?
how to replace break pads on 2001 4runner
How do you change brake pads on Toyota tacoma 2007?
How do I change the brake pads on Toyota tacoma 2007
How do you change rear brake pads on 2002 Toyota Corolla?
How do you replace the front break pads on a Toyota corolla .
How do you change brake pads on a 1994 Toyota Camry V6?
I think that Camry disk brakes were very similar from 1990 to at least 1996, and I answered the question on changing brake pads for my 1995 Camry, so maybe that will help.
How do you change rear brake pads on a 2001 Toyota Corolla?
How do I change the Front Brakes on a 2001 Toyota Corolla?
How do you change brake pads on a 1997 Toyota Celica?
Brake pads on a 1997 Toyota Celica are changed by removing the wheels, unbolting the calipers, and removing the old pads from the calipers. The caliper piston must be pushed in before the new pads can be installed.
How change brake pads in Toyota Highlander 2005?
how do you change the front brake rotor on a 2001 highlander?
How do you change the front brakes on a 1991 Toyota pickup truck?
changing front brake pads on 1991 Toyota truck
Does A 2004 Chevy Trailblazer have brake pads?
All vehicles have brake pads.mine has disk brakes and the pads take about 10 minutes a piece to change.
How do you change brake pads in a 2003 Toyota highlander?
How do I change the brake pads on my 2003 Toyota Highlander (2WD 6 Cyl)? Is the procedure any different because of the ABS system? I have heard that it may be, and do not want to damage anything by compressing the calibers.
How do you change the front disk brake on a 2003 Toyota Tacoma Truck?
To change the front disk brake on a 2003 Toyota Tacoma, first, safely lift the truck and remove the front wheel. Next, remove the caliper by unbolting it from the bracket and carefully slide it off the rotor. Replace the old brake pads with new ones, ensuring they fit properly in the caliper bracket, and then reassemble the caliper over the new pads. Finally, reattach the wheel, lower the truck, and pump the brake pedal to ensure proper engagement before driving.
How many brake pads does a Toyota Camry have?
It depends on model and year of production. If you have front and rear disk brakes, you need 8 pads (4 front and 4 rear): 2 per each wheel. If you have only front disk brakes and rear drum brakes. You will need 4 front pads and 4 rear brake shoes.
