To change the speed sensor on a 1993 Honda Del Sol with an automatic transmission, first disconnect the negative battery terminal to ensure safety. Locate the speed sensor, which is typically positioned on the transmission, and remove the electrical connector and the retaining bolt. Take out the old sensor and install the new one, securing it with the bolt and reconnecting the electrical connector. Finally, reconnect the battery and test the vehicle to ensure proper operation.
Replace the VSS (Vehicle Speed Sensor) in your transmission. It is the same part number for an automatic transmission and a manual transmission in those year models.
To change the speed sensor in a 1993 Mazda MX6 V6, first, disconnect the negative battery cable to ensure safety. Locate the speed sensor on the transmission; it is typically on the driver's side. Remove the electrical connector and any retaining bolts, then pull out the old sensor. Install the new sensor by reversing the removal steps, ensuring it's securely fitted and reconnect the battery.
Manual: Reverse light switch is at the top of the shift tower. Speed sensor on the top of the differential Automatic: Speed sensor on the top of the differential Turbine sensor on the front of the tranny near the filter Tranny temperature sensor on the front of the tranny near the valvebody cover
in the trans
It is on the transmission.
The speed sensor may be built into the hub bearing. In that case the whole hub bearing needs to be replaced.
no such thing as automatic clutch!!
the side of your transmission.. and its not a sensor its a gear.
should be a 4 speed automatic
The 1993 Lincoln Mark VIII ABS speed sensor is located on the side of the transmission. The speed sensor should be labeled as such.
witch one did you change the one in the dash or on top of the rearend
The VSS sensor is the vehicle speed sensor and it is located in the transmission. The purpose of it is to operate the speedometer and abs system.