I am actually trying to find out the same answer. From what I have read so far, squirting diesel fuel into every hole you can manage to reach (spark plugs, etc). I am not too sure, but the logic seems to be right. After that put in fresh oil, run the engine, and then change the oil again.
A water solution containing ions conduct electricity.
Detergents are in shampoo and help clean the scalp when mixed with water.
Clean water should be used and mixed with the proper coolant for your car.
A mixture of 50% clean water and 50% straight antifreeze or you can buy coolant already mixed from your local auto parts store.
Bactericide is a chemical that is used in a salon to clean. Bactericide is mixed with water.
there is water in the engine to cool it down. It is best to use a 50/50 mix of clean water and antifreeze, not just water.
Because you mixed sand and water together in the beaker.
There is a water leak somewhere in the block.
Clean water, preferably drinkable water.
( YES ) you can buy premixed engine coolant ( antifreeze mixed with water ) or concentrated antifreeze
The best way to clean a cement mantelpiece is with an all-purpose cleaner like 409. It can also be mixed with water to dilute the solution.
steam or "engine de-greaser" avaible at a auto suppy store